Influence of Disconnecting Circuit-breaker on Power Supply Reliability

被引:0
|
作者
Liu Y. [1 ]
Xiao Y. [1 ]
Fang Y. [2 ]
机构
[1] China Electric Power Research Institute, Haidian District, Beijing
[2] Library, North China Electric Power University, Changping District, Beijing
来源
关键词
disconnecting circuit breaker; Poisson distribution; reliability;
D O I
10.13335/j.1000-3673.pst.2021.1268
中图分类号
学科分类号
摘要
This paper studies the influence of the replacement of the disconnecting circuit-breaker for the bus-side disconnecting switch, the circuit-breaker and the line-side disconnecting switch on the power supply reliability. Taking a 110kV single bus with one incoming and four outgoing lines as an example And using the Poisson distribution to characterize the distribution of equipment faults, the reliability analysis model of the outgoing line based on the regular switch and the disconnecting circuit-breaker is established. The model takes into account the impact of bus withdrawal on the power supply reliability of the whole station, in which the model parameters are obtained from investigatigation. The model is used to analyze the total maintenance time of the outgoing line based on the regular switch and the disconnecting circuit-breaker respectively under different maintenance methods and different planned maintenance cycles. It is found that if the whole station is overhauled simultaneously, the power supply reliability of the outgoing line based on the disconnecting circuit-breaker is significantly better than that of the conventional switching. The reliability of power supply is not reduced due to the bus affected outage. The disconnecting circuit-breaker is worthy of being widely used. © 2022 Power System Technology Press. All rights reserved.
引用
收藏
页码:2804 / 2811
页数:7
相关论文
共 17 条
  • [1] QIU Zhibin, RUAN Jiangjun, HUANG Daochun, Mechanical fault diagnosis of high voltage disconnector based on motor current detection[J], Proceedings of the CSEE, 35, 13, pp. 3459-3466, (2015)
  • [2] ZHONG Zhenjiao, The cause and prevention of outdoor disconnector's mechanical faults[J], High Voltage Apparatus, 42, 6, pp. 464-467, (2006)
  • [3] (2011)
  • [4] LI Jinbin, RUAN Ling, CHEN Jun, Application of disconnecting circuit breaker in new generation smart substation[J], Electric Power Construction, 35, 1, pp. 30-34, (2014)
  • [5] SOLVER C E, (2007)
  • [6] YI Haiqiong, DUI Xiaowei, LI Yong, Main electrical connection optimization of smart substation based on disconnecting circuit-breaker[J], Electric Power Construction, 35, 6, pp. 92-96, (2014)
  • [7] SHI Jingnan, HU Junhui, HUANG Baoying, Et al., Layout optimization design of new generation smart substation[J], Electric Power Construction, 35, 4, pp. 31-37, (2014)
  • [8] HUANG Yangqi, LU Xinyi, LIU Nian, Analysis on reliability and sensitivity of main electrical connection for new generation smart substation with disconnecting circuit breaker[J], Electrical Engineering, 6, pp. 10-14, (2014)
  • [9] (2008)
  • [10] NING Liaoyi, WU Wenchuan, ZHANG Boming, Analysis of a time-varying power component outage model for operation risk assessment[J], Automation of Electric Power Systems, 33, 16, pp. 7-12, (2009)