Non-contact position and orientation measurement system used one dimensional optical position sensor fusion

被引：0
|
作者：
Mo J. [1 ]
Chen J. [1 ]
Wen Y. [1 ]
Liang J. [1 ]
Chen Q. [1 ]
Yan G. [1 ]
机构：
[1] College of Engineering, South China Agricultural University, Guangzhou
来源：
Guangxue Jingmi Gongcheng/Optics and Precision Engineering | 2024年 / 32卷 / 03期
关键词：
calibration; measurement; position and orientation measurement; Position Sensitive Detector（PSD）sensor; real-time feedback;
D O I：
10.37188/OPE.20243203.0344
中图分类号：
学科分类号：
摘要：
To achieve real⁃time, multi⁃degree⁃of⁃freedom measurement and feedback on the position and orientation of a robot's end⁃effector, a planar 3⁃DOF non⁃contact measurement system utilizing sensor fu-sion of a Position Sensitive Detector (PSD) was developed. The system's design involved studying the measurement principle, signal processing circuitry, ambient light interference mitigation, and a nonlinear calibration algorithm. Initially, a 4⁃PSD measurement system was tailored to the PSD sensor's measure-ment capabilities and the specific needs of planar 3⁃DOF measurement, establishing a mathematical model for the system. The PSD sensor's signal processing was then explored, achieving single PSD signal pro-cessing through an operational amplifier and divider, integrated with an MCU and A/D conversion chip for high⁃frequency signal acquisition on a PC. Preliminary tests of the 4⁃PSD system addressed ambient light interference using laser modulation and digital filtering techniques. Calibration of the 4⁃PSD system⁃com-prising origin, angle, length, and second⁃order nonlinear calibration-was conducted using a laser displace-ment sensor, detailing the calibration steps and post -calibration error distribution. The designed system boasts a high measurement frequency of 50 Hz, with calibration experiments indicating an average accura-cy of 0.49 mm within a 70 mm×70 mm range, achieving a 90% error reduction post⁃calibration. This sys-tem fulfills the majority of requirements for high⁃speed, high⁃precision, non⁃contact real⁃time measure-ment and feedback of robot end⁃effectors. © 2024 Chinese Academy of Sciences. All rights reserved.
引用
收藏
页码：344 / 356
页数：12
相关论文
共 22 条
  • [1] WOLFSLAG W, PLOOIJ M, BABUSKA R, Et al., Learning robustly stable open-loop motions for robotic manipulation［J］, Robotics and Autonomous Systems, 66, pp. 27-34, (2015)
  • [2] KUO Y L, LIN T P, WU C Y., Experimental and numerical study on the semi-closed loop control of a planar parallel robot manipulator［J］, Mathematical Problems in Engineering, 2014, pp. 1-9, (2014)
  • [3] GAN J Q, ZHANG X M, LI H, Et al., Full closed-loop controls of micro/nano positioning system with nonlinear hysteresis using micro-vision system［J］, Sensors and Actuators A：Physical, 257, pp. 125-133, (2017)
  • [4] MO J S., Research on Planar 3PRR Parallel Posi-tioning System in Micro-nano Operating Environ-ment［D］, (2016)
  • [5] MO J S, QIU Z C, ZENG L, Et al., A new calibra-tion method for a directly driven 3PRR positioning system［J］, Journal of Intelligent & Robotic Sys-tems, 85, 3, pp. 613-631, (2017)
  • [6] ZHANG H D, ZHANG X M, ZHANG X C，, Et al., Dynamic analysis of a 3-PRR parallel mechanism by considering joint clearances［J］, Nonlinear Dynam-ics, 90, 1, pp. 405-423, (2017)
  • [7] JAIN N R，, SUSHITH K., Experimental investiga-tions on robotic linear stage traverse error using draw wire sensor［J］, Materials Today：Proceed-ings, 52, pp. 1521-1529, (2022)
  • [8] TANG Y C, LI J ZH, LIN A D, Et al., Method for measuring robot pose accuracy based on coordinate measuring machine［J］, Computer Engineering and Applications, 56, 5, pp. 257-262, (2020)
  • [9] WANG W, SUN T, CHEN Z F，, Et al., Telescopic ball bar with an indexing joint for measuring machine tool error［J］, Measurement Science and Technolo-gy, 33, 10, (2022)
  • [10] WANG Q., Research on Robot Kinematics Calibra-tion and Error Compensation Technology, (2021)
123