Design and Experiment of Minituber Precision Single-row Air-suction Planter

被引：0
|
作者：
Wang F. [1 ]
Sun K. [1 ]
Lai Q. [1 ]
Dong J. [1 ]
Su W. [1 ]
Yu Q. [1 ]
机构：
[1] College of Agriculture and Food, Kunming University of Science and Technology, Kunming
来源：
Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2020年 / 51卷 / 01期
关键词：
Air-suction planter; Minituber; Single-row; Vibrating seed feeding;
D O I：
10.6041/j.issn.1000-1298.2020.01.007
中图分类号：
学科分类号：
摘要：
In the hilly and mountainous areas, it is unable to use large-scale foreign sowing machines, and the traditional mechanical miniature potato seeder has the problems of serious seed-injury and poor filling effect. In order to meet the conditions of small plot operation in hilly and mountainous areas and enhance the mechanization level of minituber, a precision single-row air-suction planter of minituber was designed. The planter consisted of seeding device, fan, ditching device, and soil and ridging device, which can complete ditching, sowing and soil covering work at one time. The working principle of the precision air-suction type planter of minituber was expounded, and the main structural parameters were determined. The "Lishu No. 6" minituber was used as the research object, the single factor test and the quadratic regression rotation orthogonal test method were used to test the seeding performance of the planter, the vibration frequency, vibration amplitude, suction negative pressure and working speed were selected as experimental factors. The mathematical models of the qualified-seeding index, the miss-seeding index and the multiple-seeding index were established, the influence of the interaction of each test factor on the qualification rate was analyzed. The best combination of working parameters was obtained by four factors and five levels quadratic regression rotary orthogonal test. After optimizing the test parameters, when the suction negative pressure was 10 kPa, the working speed was 2.5 km/h, the qualified-seeding index was greater than 90%, the miss-seeding index was less than 5%, and the multiple-seeding index was less than 5%. After field test, the qualified-seeding index of the planter was 93.28%, the miss-seeding index was 3.25% and the multiple-seeding index was 3.47%. The air-suction planter had stable operation quality and met the requirements of national standards. The results showed that the air-suction planter could fully meet the agronomic requirements of minituber planting. © 2020, Chinese Society of Agricultural Machinery. All right reserved.
引用
收藏
页码：66 / 76
页数：10
相关论文
共 20 条
  • [1] Lai Q., Ma W., Su W., Et al., Design and experiment of pneumatic disc seed-metering device for mini-tuber, Transactions of the Chinese Society for Agricultural Machinery, 47, 12, pp. 30-37, (2016)
  • [2] Li Z., Wen X., Lu J., Et al., Analysis and prospect of research progress on key technologies and equipments of mechanization of potato planting, Transactions of the Chinese Society for Agricultural Machinery, 50, 3, pp. 1-16, (2019)
  • [3] Niu K., Zhou L., Yuan Y., Et al., Design and experiment on automatic compensation system of spoon-chain potato metering device, Transactions of the Chinese Society for Agricultural Machinery, 47, pp. 76-83, (2016)
  • [4] Hu Z., Yue R., Zhu S., Et al., Design and test of 2CMW-4B mini-potato planter, Journal of Agricultural Mechanization Research, 41, 5, pp. 60-64, (2019)
  • [5] Duan H., Chen Z., Song B., Et al., Design and experiment of triangular chain half cup spoon-shaped potato precision planter in hilly mountainous areas, Transactions of the Chinese Society for Agricultural Machinery, 50, 1, pp. 96-104, (2019)
  • [6] Lu J., Wang Y., Li Z., Et al., Performance analysis and experiment of cup-belt type potato seed-metering device with flow deflector, Transactions of the CSAE, 33, 9, pp. 19-28, (2017)
  • [7] Zhang Y., Design and experimental study of air-suction potato mini seed planter, (2016)
  • [8] Lu J., Yang Y., Li Z., Et al., Design and experiment of cup-belt type potato seed-metering device, Transactions of the CSAE, 32, 16, pp. 17-25, (2016)
  • [9] Liu W., He J., Li X., Et al., Research progress of potato planter, Journal of Agricultural Mechanization Research, 40, 4, pp. 7-13, (2018)
  • [10] Mcleod C.D., Misener G.C., Tai G.C.C., Et al., A precision seeding device for true potato seed, American Potato Journal, 69, 4, pp. 255-264, (1992)
12