Research on The Automatic Modelling Method for High Precision Finite Element Model of Internal Helical Gear

被引：0
|
作者：
Liu Y. [1 ]
Zhao Y. [2 ]
机构：
[1] College of Energy and Mining Engineering, Shandong University of Science and Technology, Qingdao
[2] School of Mechatronics Engineering, Harbin Institute of Technology, Harbin
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2022年 / 58卷 / 21期
关键词：
finite element model; internal helical gear; mesh refinement; tooth contact analysis;
D O I：
10.3901/JME.2022.21.148
中图分类号：
学科分类号：
摘要：
In order to improve the accuracy and efficiency of tooth contact analysis of internal helical gears, an automatic modeling method of high-precision three-dimensional finite element model of internal helical gear is proposed. The dentiform normal method is applied to derive the tooth profile equations of the internal and external helical gear on the basis of the accurate description of the gear cutter. The parameterized coarse mesh finite element model of internal and external gears are established. Local multi-level refinement method of the hexahedral element has been developed to identify the element on the tooth surface in the contact region automatically to ensure the accuracy and mesh density of the gear finite element model. The tooth contact analysis was carried out, to obtain the bending stress, contact stress, contact stress distribution, transmission error, time-varying meshing stiffness as well as load sharing ratio of the helical internal gears. Comparison of the coarse mesh model with the refined mesh model indicate that the methodology proposed in this paper improves the modeling speed and calculation accuracy of the internal gears, but greatly shorten the computing time, which lays the foundation for fast and accurate internal gear tooth contact analysis. © 2022 Editorial Office of Chinese Journal of Mechanical Engineering. All rights reserved.
引用
收藏
页码：148 / 160
页数：12
相关论文
共 30 条
  • [1] HOTAIT M, KAHRAMAN A, NISHINO T., An investigation of root stresses of hypoid gears with misalignments[J], Journal of Mechanical Design, 133, 7, pp. 1-9, (2011)
  • [2] HASL C，, HUA L, OSTER P，, Et al., Method for calculating the tooth root stress of plastic spur gears meshing with steel gears under consideration of deflection-induced load sharing[J], Mechanism and Machine Theory, 111, pp. 152-163, (2017)
  • [3] JABBOUR T, ASMAR G., Tooth stress calculation of metal spur and helical gears[J], Mechanism and Machine Theory, 92, pp. 375-390, (2015)
  • [4] MAO K., Gear tooth contact analysis and its application in the reduction of fatigue wear[J], Wear, 262, 11, pp. 1281-1288, (2007)
  • [5] ZHOU C，, CHEN C, GUI L, Et al., A nonlinear multi-point meshing model of spur gears for determining the face load factor[J], Mechanism and Machine Theory, 126, pp. 210-224, (2018)
  • [6] KIEKBUSCH T, SAPPOK D, SAUER B, Et al., Calculation of the combined torsional mesh stiffness of spur gears with two- and three- dimensional parametrical FE models[J], Strojniski Vestnik-journal of Mechanical Engineering, 57, 11, pp. 810-818, (2011)
  • [7] TANG X, ZOU L, YANG W，, Et al., Novel mathematical modelling methods of comprehensive mesh stiffness for spur and helical gears[J], Applied Mathematical Modelling, 64, pp. 524-540, (2018)
  • [8] MA H, ZENG J, FENG R, Et al., An improved analytical method for mesh stiffness calculation of spur gears with tip relief[J], Mechanism and Machine Theory, 98, pp. 64-80, (2016)
  • [9] TSAI S J, YE S., A computerized approach for loaded tooth contact analysis of planetary gear drives considering relevant deformations[J], Mechanism and Machine Theory, 122, pp. 252-278, (2018)
  • [10] LUO Tao, QIN Xunpeng, HUANG Jinjing, Research of the effect of profile deviation on contact characteristic of helical gear[J], Journal of Mechanical Transmission, 39, 4, pp. 1-7, (2015)
123