A Heat Flux Identification Method for Reentry Vehicle Structures

被引：0
|
作者：
Liu Z.-A. [1 ,2 ]
Chen Q. [1 ,2 ]
Wu S.-Q. [2 ]
Li Y.-B. [1 ,2 ]
Fei Q.-G. [1 ,2 ]
机构：
[1] School of Mechanical Engineering, Southeast University, Nanjing
[2] Jiangsu Engineering Research Center of Aerospace Machinery, Southeast University, Nanjing
来源：
Yuhang Xuebao/Journal of Astronautics | 2022年 / 43卷 / 03期
关键词：
Conjugate gradient method; Heat flux identification; Reentry vehicle; Thermal protection structure;
D O I：
10.3873/j.issn.1000-1328.2022.03.009
中图分类号：
学科分类号：
摘要：
Based on the conjugate gradient method (CGM), a heat flux identification method for reentry vehicle structures is proposed. A one-dimensional structure is firstly adopted as the research object to verify the effectiveness of the proposed heat flux identification method. The influences of both the temperature-dependent thermal properties of the material and the measurement error of the sensors on the identification accuracy are analyzed. Then, the heat flux identification analysis for the thermal protection structure and complex reentry capsule is presented. Research results indicate that the proposed method could effectively identify the heat flux of thermal protection structure and reentry capsule structure. When the nonlinearity caused by the thermophysical parameters of the material is considered in the identification process, the accuracy of the identified results could be improved by updating the sensitivity during the calculation. When the sensor has a large measurement error, by using the noise reduction method and the convergence criteria, the over-fitting phenomenon can be solved, and the identification accuracy can be improved. © 2022, Editorial Dept. of JA. All right reserved.
引用
收藏
页码：336 / 343
页数：7
相关论文
共 22 条
  • [1] Du Fei, Xu Chao, Yu Ze-xing, Research progress on structural health monitoring technology for reusable launch vehicles, Journal of Astronautics, 40, 10, pp. 1177-1186, (2019)
  • [2] Kang Tian, Li Ming-hai, Li Chun-li, Et al., Recent development of re-entry aero-thermal-dynamic environmental prediction and test technology, Equipment Environmental Engineering, 18, 3, pp. 1-8, (2021)
  • [3] Chen Q, Fei Q G, Devriendt H, Et al., The dynamic bending analysis of plates under thermal load using an efficient wave-based method, Thin-Walled Structures, 149, (2020)
  • [4] He Dong-ze, Li Yan-bin, Chen Qiang, Et al., Force-thermal-electricity integration analysis of large-scared thin-walled structures, Journal of Astronautics, 42, 1, pp. 74-82, (2021)
  • [5] Chen Q, Ma W Y, Fei Q G, Et al., An efficient wave-based method for the mid-frequency transverse vibration analysis of a thermal beam with interval uncertainties, Aerospace Science and Technology, 110, 8, (2021)
  • [6] Long Li-ping, Han Jun, Wan Tian, Et al., Research of coupling computational method about the nose-tip ablation of reentry vehicle, Structure and Environment Engineering, 48, 2, pp. 8-14, (2021)
  • [7] Meng Song-he, Yang Qiang, Huo Shi-yu, Et al., State-of-arts and trend of integrated thermal protection systems, Journal of Astron-autics, 34, 10, pp. 1295-1302, (2013)
  • [8] Gu Zheng, Chen Li-ping, Wang Tong, Et al., A method for ablation temperature inflight measuring of reentry vehicle, Spacecraft Engineering, 24, 2, pp. 129-133, (2015)
  • [9] Qian Wei-qi, Cai Jin-shi, Surface heat flux identification of reentry space shuttle, Journal of Astronautics, 21, 4, pp. 1-6, (2000)
  • [10] Lu T, Liu B, Jiang P X., Inverse estimation of the inner wall temperature fluctuations in a pipe elbow, Applied Thermal Engineering, 31, 11, pp. 1976-1982, (2011)
123