Static and fatigue test technology for full-scale composite fuselage barrels

被引：0
|
作者：
Guo Q. [1 ]
Liu W. [1 ]
Pei L. [1 ]
Guo J. [1 ]
机构：
[1] Aviation Technology Key Laboratory of Full Scale Aircraft Structure Static and Fatigue Test, Aircraft Strength Research Institute of China, Xi'an
来源：
Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica | 2022年 / 43卷 / 06期
关键词：
boundary simulation; composite fuselage; integrated loading system; static and fatigue test; statically determinate restraint system;
D O I：
10.7527/S1000-6893.2022.25816
中图分类号：
学科分类号：
摘要：
Static and fatigue test for full-scale composite fuselage barrels is firstly planed as a large composite component test. In order to finish the test successfully and accumulate relevant technical experience, the current status of static/fatigue test technology for civil aircraft and large transport aircraft is presented. A special boundary simulation of composite fuselage with large diameter and heavy load, brace strut-differential combined statically determinate restraint system and an integrated loading system of static/fatigue test had been studied and applied. These above-mentioned new technologies had been successfully applied on the test,which have accelerated test implementation speed, and improved the safety and reliability of the test. The results showed that the technologies are safe, reliable and efficient. The test requirements and expected objectives have been achieved, and a complete and effective test technology system for a large full-scale composite fuselage barrels test is formed, which provides a good foundation for the application of composite materials for wide body aircraft fuselage. © 2022 AAAS Press of Chinese Society of Aeronautics and Astronautics. All rights reserved.
引用
收藏
相关论文
共 23 条
  • [1] AC20-107B composite aircraft structure: AC No, 20-107B, (2009)
  • [2] FAN Z W, CHEN T, ZHANG X., The means of airworthiness certification for the composite rear-fuselage structure of civil aircraft [J], Hi-Tech Fiber & Application, 43, 2, pp. 36-40, (2018)
  • [3] GUAN Q Y., Composite qualification of civil airplane for airwo rthiness [J], Fiber Composites, 35, 3, pp. 77-81, (2018)
  • [4] ZHENG X L., Analysis and research on the airworthihess compliance of compisite structure [J], Civil Aircraft Design & Research, 1, pp. 1-6, (2017)
  • [5] GAO Y S., Damage assessment of civil aircraft composite structure and its airworthiness compliance verification re-search, (2018)
  • [6] LI G L, CHENG W Z., Study on the integrated test of static, durability and damage tolerance of composite box section [J], Aircraft Design, 14, 2, pp. 6-11, (1994)
  • [7] TANG J L, ZHU G R, LI K, Et al., Fatigue and damage tolerance test for composite component of civil aircraft [C], Papers of the 17th National Conference on Composite Materials, pp. 265-270, (2012)
  • [8] LIU J., The full-scale test method for airworthiness certification of composite pressure bulkhead [J], Aircraft Design, 34, 6, pp. 48-52, (2014)
  • [9] SUN X SH, QI P Q., Design and verification guide of strength and stiffness in civil aircraft structure, Volume one [M], (2012)
  • [10] QIANG B P., Evaluation of full scale aircraft structure strength test technology [J], Aeronautical Science & Technology, 23, 6, pp. 10-13, (2012)
123