Effect of molybdenum valence in low Mo/Sn ratio catalysts for the oxidation of methanol to dimethoxymethane

被引：0

作者：

Wang J. ^{[1
,2
]}

Gao X. ^{[1
,2
]}

Song F. ^{[1
]}

Zhang J. ^{[1
]}

Wang X. ^{[1
]}

Zhang T. ^{[1
]}

Tan Y. ^{[1
]}

Han Y. ^{[1
]}

Zhang Q. ^{[1
,3
]}

机构：

[1] State Key Laboratory of Coal Conversion, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan

[2] University of Chinese Academy of Sciences, Beijing

[3] Dalian National Laboratory for Clean Energy, Dalian

来源：

Ranliao Huaxue Xuebao/Journal of Fuel Chemistry and Technology | 2024年 / 52卷 / 01期

基金：

中国国家自然科学基金;

关键词：

dimethoxymethane; low temperature oxidation; methanol; Mo1Sn20; catalyst; Mo[!sup]6+[!/sup] species;

D O I：

10.1016/S1872-5813(23)60370-6

中图分类号：

学科分类号：

摘要：

A series of Mo/Sn (1:20, molar ratio) catalysts were prepared by two-step hydrothermal synthesis method, and the effect of calcination temperature of tin precursors on the reaction performance of methanol oxidation to dimethoxymethane (DMM) was investigated. The crystal structure, surface properties, redox property and valence change of molybdenum species of the catalyst were characterized by XRD, Raman, FT-IR, XPS, NH3-TPD and H2-TPR. The results showed that Mo1Sn20-600℃Sn catalyst exhibited better performance than other catalysts, achieving DMM selectivity of 90% with methanol conversion of 30% at 140 ℃. From the characterization results, the surface properties of the tin precursors affected the structure of catalyst, the degree of molybdenum oxide dispersion and valence of molybdenum species, and further influenced the performance of the catalysts. The high temperature calcination of tin precursors is more favorable for the generation of Mo6+ in the Mo1Sn20 catalyst. © 2024 Science Press. All rights reserved.

引用

页码：38 / 46

页数：8

共 37 条

[1] WU Q, TU K, ZENG Y, Et al., Discussion on the main problems and countermeasures for building an upgrade version of main energy (coal) industry in China[J], J China Coal Soc, 44, 6, pp. 1625-1636, (2019)
[2] XIE H, WU L, ZHENG D., Prediction on the energy consumption and coal demand of China in 2025[J], J China Coal Soc, 44, 7, (2019)
[3] SHIH C F, ZHANG T, LI J H, Et al., Powering the future with liquid sunshine[J], Joule, 2, 10, pp. 1925-1949, (2018)
[4] REN J, XIN F, XU Y S., A review on direct synthesis of dimethoxymethane[J], Chin J Chem Eng, 50, pp. 43-55, (2022)
[5] SCHMITZ N, BURGER J, HASSE H., Reaction kinetics of the formation of poly(oxymethylene) dimethyl ethers from formaldehyde and methanol in aqueous solutions[J], Ind Eng Chem Res, 54, 50, (2015)
[6] YUAN M, DONG M R, TIAN Z W, Et al., Reaction mechanisms and catalysis in the one-step synthesis of methylal via methanol oxidation[J], J Energy Inst, 103, (2022)
[7] GAO X J, ZHANG J F, SONG F E, Et al., Selective oxidation conversion of methanol/dimethyl ether[J], Chem Commun, 58, 30, pp. 4687-4699, (2022)
[8] AHMAD W, CHAN F L, SHROTRI A, Et al., Dimethoxymethane production via CO2 hydrogenation in methanol over novel Ru based hierarchical BEA[J], J Energy Chem, 66, pp. 181-189, (2022)
[9] YUAN Y Z, LIU H C, IMOTO H, Et al., Performance and characterization of a new crystalline SbRe2O6 catalyst for selective oxidation of methanol to methylal[J], J Catal, 195, 1, (2000)
[10] LIU H C, IGLESIA E., Effects of support on bifunctional methanol oxidation pathways catalyzed by polyoxometallate Keggin clusters[J], J Catal, 223, 1, (2004)

← 1 2 3 4 →