Electromagnetic Tomography System for Defect Detection of High-Speed Rail Wheel

被引:0
|
作者
Miao Y. [1 ]
Liu X. [2 ]
Liu Z. [1 ]
Yue Y. [1 ]
Wu J. [1 ]
Huo J. [1 ]
Li Y. [1 ]
机构
[1] School of Electronic Information Engineering, Beijing Jiaotong University, Beijing
[2] School of Electrical and Information Engineering, Zhengzhou University of Light Industry, Zhengzhou
基金
中国国家自然科学基金;
关键词
Defect detection; Electromagnetic tomography(EMT); High-speed rail wheel; Image reconstruction;
D O I
10.15918/j.jbit1004-0579.20047
中图分类号
学科分类号
摘要
A novel electromagnetic tomography(EMT) system for defect detection of high-speed rail wheel is proposed, which differs from traditional electromagnetic tomography systems in its spatial arrangements of coils. A U-shaped sensor array was designed, and then a simulation model was built with the low frequency electromagnetic simulation software. Three different algorithms were applied to perform image reconstruction, therefore the defects can be detected from the reconstructed images. Based on the simulation results, an experimental system was built and image reconstruction were performed with the measured data. The reconstructed images obtained both from numerical simulation and experimental system indicated the locations of the defects of the wheel, which verified the feasibility of the EMT system and revealed its good application prospect in the future. © 2020 Journal of Beijing Institute of Technology
引用
收藏
页码:474 / 483
页数:9
相关论文
共 50 条
  • [1] Electromagnetic Tomography System for Defect Detection of High-Speed Rail Wheel
    Yu Miao
    Xianglong Liu
    Ze Liu
    Yuanli Yue
    Jianli Wu
    Jiwei Huo
    Yong Li
    Journal of Beijing Institute of Technology, 2020, 29 (04) : 474 - 483
  • [2] Rail Corrugation Detection of High-Speed Railway Using Wheel Dynamic Responses
    Li, Jianbo
    Shi, Hongmei
    SHOCK AND VIBRATION, 2019, 2019
  • [3] Defect Detection Performance of a High-speed Rail Inspection System from Passive Acoustic Identification
    Datta, Diptojit
    Liang, Albert
    Cui, Ranting
    di Scalea, Francesco Lanza
    SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2020, 2020, 11379
  • [4] Research on defect detection of high-speed rail based on multi-frequency excitation composite electromagnetic method
    Xu, Peng
    Zeng, Hongming
    Qian, Tengfei
    Liu, Lili
    MEASUREMENT, 2022, 187
  • [5] Tribology between wheel and rail for high-speed railways
    Research and Development Promotion Division, Railway Technical Research Institute, 8-38, Hikaricho 2-chome, Kokubunnjishi, Tokyo 185-8540, Japan
    J Jpn Soc Tribol, 2013, 7 (441-446):
  • [6] An electromagnetic energy harvester for applications in a high-speed rail pavement system
    Cao, Hao
    Kong, Lingji
    Tang, Minfeng
    Zhang, Zutao
    Wu, Xiaoping
    Lu, Linhai
    Li, Dongyang
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2023, 243
  • [7] Effects of Wheel Flats on Vibration and Stress Response of the Wheel-Rail System in High-Speed Trains
    Dong, Ziyu
    Wang, Wenjing
    Zhang, Kun
    Wang, Yan
    INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS, 2024,
  • [8] Rail fatigue crack propagation in high-speed wheel/rail rolling contact
    Jiang X.
    Li X.
    Li X.
    Cao S.
    Journal of Modern Transportation, 2017, 25 (3): : 178 - 184
  • [9] Out of round high-speed wheel and its influence on wheel/rail behavior
    Cui, D. (cdb1645@163.com), 1600, Chinese Mechanical Engineering Society (49):
  • [10] Rail fatigue crack propagation in high-speed wheel/rail rolling contact
    Xiaoyu Jiang
    Xiaotao Li
    Xu Li
    Shihao Cao
    Railway Engineering Science, 2017, (03) : 178 - 184