Crystalline Modification and Property Improvement of Polypropylene-based Composites

被引：0
|
作者：
Chi X. [1 ,2 ]
Chen L. [1 ]
Liu W. [1 ]
Min D. [1 ]
Zhang X. [2 ]
Li S. [1 ]
机构：
[1] State Key Laboratory of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an
[2] Key Laboratory of Engineering Dielectric and Its Application, Ministry of Education, Harbin University of Science and Technology, Harbin
来源：
Gaodianya Jishu/High Voltage Engineering | 2019年 / 45卷 / 07期
基金：
中国国家自然科学基金;
关键词：
Crystalline; Dielectric properties; Mechanical properties; PP-based composites; Thermoplastic insulator of HVDC cable;
D O I：
10.13336/j.1003-6520.hve.20190628013
中图分类号：
学科分类号：
摘要：
Due to the superior thermal and dielectric properties of polypropylene(PP), PP becomes a suitable candidate for thermoplastic insulator of high-voltage direct-current(HVDC) cable. In this paper, both nano-SiO2 and polyethylene octene(POE) were introduced in PP matrix, in order to modify the crystalline and improve the electrical and mechanical properties. The morphology, DC breakdown strength, space charge distribution, crystallization behavior and mechanical properties were characterized by scanning electron microscopy(SEM), polarized light microscopy (PLM), AC/DC breakdown system, pulsed electro-acoustic system(PEA), differential scanning calorimeter(DSC), and electronic universal testing. The results showed that the DC breakdown field was enhanced, the space charge was inhibited and the mechanical properties were improved in the composite with the co-doping of nanoparticles filling and POE blending. The breakdown strength increased by about 25% and the elongation at break increased by about 30% in the composite compound of PP, POE and nano-SiO2, compared with raw PP sample. The modification of mechanical and dielectric properties provides promising results for the application of PP in HVDC cables. © 2019, High Voltage Engineering Editorial Department of CEPRI. All right reserved.
引用
收藏
页码：2249 / 2256
页数：7
相关论文
共 36 条
  • [1] Rao H., Zhang D., Zhao X., Et al., Practice and analyses of UHVDC power transmission, High Voltage Engineering, 41, 8, pp. 2481-2488, (2015)
  • [2] Li S.T., Yu S.H., Feng Y., Progress in and prospects for electrical insulating materials, High Voltage, 1, 3, pp. 122-129, (2016)
  • [3] Li S., Wang S., Li J., Research progress and path analysis of insulating materials used in HVDC cable, High Voltage Engineering, 44, 5, pp. 1399-1411, (2018)
  • [4] Zha J.W., Yan H.D., Li W.K., Et al., Morphology and crystalline-phase-dependent electrical insulating properties in tailored polypropylene for HVDC cables, Applied Physics Letters, 109, 22, (2016)
  • [5] He J., Peng L., Zhou Y., Research progress of environment-friendly HVDC power cable insulation materials, High Voltage Engineering, 43, 2, pp. 337-343, (2017)
  • [6] Wal A.V.D., Verheul A.J.J., Gaymans R.J., Polypropylene-rubber blends: 4. The effect of the rubber particle size on the fracture behaviour at low and high test speed, Polymer, 40, 22, pp. 6057-6065, (1999)
  • [7] D'Orazio L., Mancarella C., Martuscelli E., Et al., Isotactic polypropylene/ethylene-co-propylene blends: effects of the copolymer microstructure and content on rheology, morphology and properties of injection moulded samples, Polymer, 40, 10, pp. 2745-2757, (1999)
  • [8] Wal A.V.D., Nijhof R., Gaymans R.J., Polypropylene-rubber blends: 2. The effect of the rubber content on the deformation and impact behaviour, Polymer, 40, 22, pp. 6031-6044, (1999)
  • [9] Jiang W., Tjong S.C., Li R.K.Y., Brittle-tough transition in PP/EPDM blends: effects of interparticle distance and tensile deformation speed, Polymer, 41, 9, pp. 3479-3482, (2000)
  • [10] Mendientagarcia M.B., Paramogarcia U., Diazzavala N.P., Et al., Thermal & morphological evaluation of linear and radial SEBS-polypropylene blends, Polimeros-ciencia E Tecnologia, 23, 5, pp. 597-601, (2013)
1234