3D visualization real-time monitoring method for digital twin workshop

被引：0

作者：

Zhao H. ^{[1
]}

Liu J. ^{[1
]}

Xiong H. ^{[1
]}

Zhuang C. ^{[1
]}

Miao T. ^{[1
]}

Liu J. ^{[1
]}

Wang B. ^{[2
]}

机构：

[1] School of Mechanical Engineering, Beijing Institute of Technology, Beijing

[2] Beijing Spacecraft Manufacturing Factory, Beijing

来源：

Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS | 2019年 / 25卷 / 06期

关键词：

3D visualization monitoring; Aerospace moduct; Digital twin workshop; Real-time information; Workshop;

D O I：

10.13196/j.cims.2019.06.011

中图分类号：

学科分类号：

摘要：

Aiming at the real-time visualization monitoring problem in digital twin workshop, a three-dimensional visualization monitoring method based on real-time information for workshop was proposed. The relationship between digital twin workshop and three-dimensional visualization real-time monitoring was analyzed. A multi-level three-dimensional visualization monitoring mode and a real-time data-driven virtualization workshop operation mode were proposed. On this basis, four key implementation technologies for real-time information-based 3D real-time visualization monitoring of workshop such as virtual workshop geometry modeling, workshop real-time data management, workshop multi-level 3D visualization monitoring and workshop state Kanban construction method were elaborated in detail. The prototype system was designed and developed, and the effectiveness of the proposed method was verified by a practical case study. © 2019, Editorial Department of CIMS. All right reserved.

引用

页码：1432 / 1443

页数：11

共 25 条

[1] Monostori L., Kadar B., Bauernhansl T., Et al., Cyber-physical systems in manufacturing, CIRP Annals-Manufacturing Technology, 65, 2, pp. 621-641, (2016)
[2] Rosen R., Von-Wichert G., Lo G., Et al., About the importance of autonomy and digital twinsfor the future ofmanufacturing, IFAC-PapersOnLine, 48, 3, pp. 567-572, (2015)
[3] Zhao R., Zhang H., Fan L., Et al., Research on relationship between digital factory and virtual manufacturing, Computer Integrated Manufacturing Systems, 10, (2004)
[4] Ning R., Liu J., Tang C., Modeling and simulation technology in digital manufacturing, Chinese Journal of Mechanical Engineering, 42, 7, pp. 132-137, (2006)
[5] Bi Z., Wang G., Xu L., A visualization platform for internet of things in manufacturing applications, Internet Research, 26, 2, pp. 377-401, (2016)
[6] Ferrer G., Heath S.K., Dew N., An RFID application in large job shop remanufacturing operations, International Journal of Production Economics, 133, 2, pp. 612-621, (2011)
[7] Cao W., Jiang P., Jiang K., Et al., Radio frequency identification-based real-time data collecting and visual monitoring for discrete manufacturing workshop, Computer Integrated Manufacturing Systems, 23, 2, pp. 273-284, (2017)
[8] Huang Y., Williams B.C., Zheng L., Reactive, model-based monitoring in RFID-enabled manufacturing, Computers in Industry, 62, 8-9, pp. 811-819, (2011)
[9] Hu J.W., Lewis F.L., Gan O.P., Et al., Discrete-event shop-floor monitoring system in RFID-enabled manufacturing, IEEE Transactions on Industrial Electronics, 61, 12, pp. 7083-7091, (2014)
[10] Zhang C., Yao X., Zhang J., Reai-time monitoring of workpieces based on RFID and CEP for manufacturing workshop, Journal of Hunan University: Natural Science, 44, 4, pp. 38-45, (2017)

← 1 2 3 →