Effect of cellulose nano fibers and nano clays on the mechanical, morphological, thermal and dynamic mechanical performance of kenaf/epoxy composites

被引：0
|
作者：
Khan, Anish [1 ,2 ]
Asiri, Abdullah M. [1 ,2 ]
Jawaid, M. [3 ]
Saba, N. [3 ]
Inamuddin [1 ,2 ]
机构：
[1] Center of Excellence for Advanced Materials Research, King Abdulaziz University, P.O. Box 80203, Jeddah,21589, Saudi Arabia
[2] Chemistry Department, Faculty of Science, King Abdulaziz University, P.O. Box 80203, Jeddah,21589, Saudi Arabia
[3] Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Products (INTROP), Universiti Putra Malaysia, UPM, Serdang,Selangor,43400, Malaysia
来源：
Carbohydrate Polymers | 2020年 / 239卷
关键词：
Nanocomposites - Nanofibers - Fillers - Nanocellulose - Hemp - Thermodynamic stability - Kenaf fibers - Dynamics;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The aim of the present research work has focused on investigating the effect of cellulose nanofibers (CNFs) and nano clays (montmorillonite (MMT) & organoclay (OMMT)) at 0.75Wt % on the performance of kenaf/epoxy composites. Mechanical (tensile and flexural) and thermal properties of composites in terms of morphology, thermal stability, weight loss, and dynamic mechanical properties were analyzed. The obtained results revealed that the integration of stiff CNFs as filler enhanced the mechanical and thermal properties, storage and loss modulus while a considerable decrease in Tan δ was realized compared to kenaf/epoxy composites. Enhancement in the properties was observed for OMMT and CNFs composites compared to MMT/kenaf/epoxy composites, which is attributed to the uniform filler distribution and interfacial adhesion between CNFs, OMMT, kenaf and epoxy matrix. The obtained results revealed that OMMT and CNFs based kenaf/epoxy composites can be an efficient alternative for construction applications. © 2020 Elsevier Ltd
引用
收藏
相关论文
共 50 条
  • [1] Effect of cellulose nano fibers and nano clays on the mechanical, morphological, thermal and dynamic mechanical performance of kenaf/epoxy composites
    Khan, Anish
    Asiri, Abdullah M.
    Jawaid, M.
    Saba, N.
    Inamuddin
    CARBOHYDRATE POLYMERS, 2020, 239
  • [2] Effect of oil palm nano filler on mechanical and morphological properties of kenaf reinforced epoxy composites
    Saba, N.
    Paridah, M. T.
    Abdan, K.
    Ibrahim, N. A.
    CONSTRUCTION AND BUILDING MATERIALS, 2016, 123 : 15 - 26
  • [3] Biodegradable Composites Reinforced with Kenaf Fibers: Thermal, Mechanical, and Morphological Issues
    Russo, Pietro
    Carfagna, Cosimo
    Cimino, Francesca
    Acierno, Domenico
    Persico, Paola
    ADVANCES IN POLYMER TECHNOLOGY, 2013, 32 : E313 - E322
  • [4] Effect of kenaf fibre loading on thermal and dynamic mechanical properties of bio epoxy composites
    Jawaid, Mohammad
    Awad, Sameer
    Ismail, Ahmad Safwan
    Hashem, Mohamed
    Fouad, Hassan
    Uddin, Imran
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2024, 149 (19) : 10441 - 10448
  • [5] The effect of alkaline treatment on mechanical properties of kenaf fibers and their epoxy composites
    Fiore, V.
    Di Bella, G.
    Valenza, A.
    COMPOSITES PART B-ENGINEERING, 2015, 68 : 14 - 21
  • [6] Effect of Extracted Nano-cellulose from Paper Egg Trays on Mechanical Properties of Vinyl Ester/Kenaf Fibers Composites
    Yu, Ruiwen
    Prabhakar, M. N.
    Song, Jung-il
    JOURNAL OF POLYMERS AND THE ENVIRONMENT, 2022, 30 (12) : 5313 - 5326
  • [7] Effect of Extracted Nano-cellulose from Paper Egg Trays on Mechanical Properties of Vinyl Ester/Kenaf Fibers Composites
    Ruiwen Yu
    M.N. Prabhakar
    Jung-il Song
    Journal of Polymers and the Environment, 2022, 30 : 5313 - 5326
  • [8] Effect of nano-clay fillers on mechanical and morphological properties of Napier/epoxy Composites
    Lim, K. H.
    Majid, M. S. A.
    Ridzuan, M. J. M.
    Basaruddin, K. S.
    Afendi, M.
    INTERNATIONAL CONFERENCE ON APPLICATIONS AND DESIGN IN MECHANICAL ENGINEERING (ICADME 2017), 2017, 908
  • [9] Effect of fibers treatment on dynamic mechanical and thermal properties of epoxy hybrid composites
    Jawaid, Mohammad
    Alothman, Othman Y.
    Saba, Naheed
    Tahir, Paridah Md.
    Khalil, H. P. S. Abdul
    POLYMER COMPOSITES, 2015, 36 (09) : 1669 - 1674
  • [10] Performance of cementitious composites with nano PCMs and cellulose nano fibers
    Alzoubi, Hussain H.
    Albiss, Borhan A.
    Abu Sini, Shatha S.
    CONSTRUCTION AND BUILDING MATERIALS, 2020, 236
12345