Calibration of contact parameters of straw biochar based on discrete element method

被引：0
|
作者：
Zhang Y. [1 ]
Ren D. [1 ]
Gong Y. [1 ]
Li J. [1 ]
Cheng H. [1 ]
Zhang L. [1 ]
机构：
[1] School of Engineering, Shenyang Agricultural University, Shenyang
来源：
Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2022年 / 43卷 / 11期
关键词：
Biochar; Constitutive models; Discrete element method; Experimental design; Parameter calibration;
D O I：
10.19912/j.0254-0096.tynxb.2021-0177
中图分类号：
学科分类号：
摘要：
In order to obtain the discrete element simulation parameters of straw biochar, the contact parameters of biochar are calibrated by combining simulation analysis with physical experiment. The Placket-Burman test is used to screen out the biochar discrete element significant influence parameters and the steepest climb test is used to determine the optimal interval of the significant parameters, as well as the Box-Behnken test is applied to determine the three significant parameters, the tests results shows that the values of significant parameters for charcoal-charcoal rolling friction coefficients, surface energy JKR (J/m2)and charcoal-steel rolling friction coefficient are 0.097, 0.018, and 0.256 respectively. The comparison of Rocky simulation results and the stacking angle test points out that the error of the specified parameters is 2.33%, which meets the setting requirements of the simulation analysis parameters. © 2022, Solar Energy Periodical Office Co., Ltd. All right reserved.
引用
收藏
页码：345 / 351
页数：6
相关论文
共 30 条
  • [1] XIAO L G, DING Y B., Application and research progress of straw building materials, Applied chemical industry, 50, 4, pp. 1142-1146, (2021)
  • [2] LIU J Z, NIU W J, ZHONG F, Et al., Combustion characteristics and kinetic analysis of different types of crop residue biochars, Acta energiae solaris sinica, 40, 6, pp. 1647-1655, (2019)
  • [3] CHEN W F, ZHANG W M, MENG J, Et al., Researches on biochar application technology, China engineering sciences, 13, 2, pp. 83-89, (2011)
  • [4] FREE H F, MCGILL C R, ROWARTH J S, Et al., The effect of biochars on maize (Zea mays) germination, New Zealand journal of agricultural research, 53, 1, pp. 1-4, (2010)
  • [5] WANG Y, SUN C C, ZHOU J H, Et al., Effects of biochar addition on soil bacterial community in semi-arid rejion, China environmental science, 39, 5, pp. 2170-2179, (2019)
  • [6] MAK J, CHEN Y, SADEK M A., Determining parameters of a discrete element model for soil-tool interaction, Soil and tillage research, 118, pp. 117-122, (2012)
  • [7] LI B, CHEN Y, CHEN J., Modeling of soil-claw interaction using the discrete element method (DEM), Soil and tillage research, 158, pp. 177-185, (2016)
  • [8] CHEN Y, MUNKHOLM L J, NYORD T., A discrete element model for soil-sweep interaction in three different soils, Soil and tillage research, 126, pp. 34-41, (2013)
  • [9] XIAO X W, TAN Y Q, ZHANG H, Et al., Experimental and DEM studies on the particle mixing performance in rotating drums: effect of area ratio, Powder technology, 314, pp. 182-194, (2017)
  • [10] XIANG W, WU M L, LYU J N, Et al., Physical parameter calibration of clay loam simulation based on accumulati on test, Transactions of the Chinese Society of Agricultural Engineering, 35, 12, pp. 116-123, (2019)
123