Influences of rigid and flexible normal contacts on stress of concrete cut-off walls

被引:0
|
作者
Xu H. [1 ]
Pan J.-J. [1 ]
Jiang J.-W. [1 ]
Tan F. [1 ]
Yang X.-G. [1 ]
机构
[1] Key Laboratory of Geotechnical Mechanics and Engineering of the Ministry of Water Resources, Changjiang River Scientific Research Institute, Wuhan
来源
Yantu Gongcheng Xuebao/Chinese Journal of Geotechnical Engineering | 2019年 / 41卷
关键词
Computed tomography; Concrete cut-off wall; Numerical simulation; Rigid-flexible normal contact;
D O I
10.11779/CJGE2019S1031
中图分类号
学科分类号
摘要
In the design of high rockfill dams with clay core wall on deep overburden, how to accurately predict the stress of concrete cut-off walls is the key scientific problem to be solved. An experimental study on the penetration of a cut-off wall into clay is carried out, and the deformation behavior of the clay at the top of the cut-off wall is obtained by means of the computed tomography. It is proposed that the flexible normal contact constitutive model should be adopted in the simulation of the normal contact between the top of the cut-off wall and the clay, and the finite element model is established to study the stress of the concrete cut-off wall under the rigid and flexible normal contacts. The results show that the top of the cut-off wall cuts the surrounding soil, and obvious penetration into soil displacement occurs. The normal hard contact constitutive model does not allow the contact surface to be embedded, so the restriction effect of the clay around the top of the cut-off wall is too strong, which leads to the high compressive stress at the top of the cut-off wall. The flexible normal contact constitutive model allows a certain degree of contact surface to be embedded and the embedding displacement of the contact surface can be interpreted as the actual penetration displacement. It can well simulate the punching failure phenomenon of cut-off walls penetrating into clay in practical engineering. © 2019, Editorial Office of Chinese Journal of Geotechnical Engineering. All right reserved.
引用
收藏
页码:121 / 124
页数:3
相关论文
共 6 条
  • [1] Yu X., Kong X.-J., Zou D.-G., Deformation and stress distribution characteristics of concrete cut-off wall, Journal of Zhejiang University (Engineering Science), 51, 9, pp. 1704-1711, (2017)
  • [2] Ding Y.-H., Zhang Q.-G., Zhang B.-Y., FEM analysis of stress-deformation characteristics of cut-off walls in high core rockfilldam, Journal of Hydroelectric Engineering, 32, 3, pp. 162-167, (2013)
  • [3] Zhu J.-G., Shakir R.R., Yang Y.-L., Et al., Comparison of behaviors of clay-concrete interface from ring-shear and simple shear tests, Rock and Soil Mechanics, 32, 3, pp. 692-696, (2011)
  • [4] Cheng Z.-L., Strain status of vertical impervious wall in TGP stage-2 upstream cofferdam, Journal of Yangtze River Scientific Research Institute, 21, 6, pp. 34-37, (2004)
  • [5] Yu X., Zou D.G., Kong X.J., Et al., Large-deformation finite element analysis of the interaction between concrete cut-off walls and high plasticity clay in an earth core dam, Engineering Computations, 34, 4, pp. 1126-1148, (2017)
  • [6] Zhang Q.L., Wu H.G., Using softened contact relationship describing compressible membrane in FEA of spiral case structure, Archives of Civil and Mechanical Engineering, 13, 4, pp. 506-517, (2013)