Two-phase Flow Distribution Characteristics of Parallel-flow Evaporator Considering Heat Transfer in Flat Tubes

被引:0
|
作者
Zhao L. [1 ]
Bao G. [1 ,2 ]
Yang Z. [2 ]
机构
[1] School of Mechanical Engineering, Tongji University, Shanghai
[2] Shanghai Key Laboratory of Vehicle Aerodynamics and Vehicle Thermal Management Systems, Tongji University, Shanghai
来源
关键词
computational fluid dynamics; inhomogeneity; parallel flow evaporator; phase change process; two-phase flow distribution;
D O I
10.11908/j.issn.0253-374x.22063
中图分类号
学科分类号
摘要
Considering the phase change process of refrigerant in flat tubes,the SST(shear stress transm ission)k ⁃ ω model and the Eulerian-Eulerian two-phase flow model are used to simulate the two-phase distribution characteristics of refrigerant in parallel-flow evaporators. It is found that increasing the refrigerant mass flow rate and inlet quality will lead to a decrease in the uniformity of refrigerant distribution. When the refrigerant mass flow rate increases from 15g·s−1 to 25 g· s−1,the distribution inhomogeneity increases by 39.4%;When the inlet quality increased from 0 to 0.3, the corresponding increase in inhomogeneity is 50.8%. Appropriately increasing the inner diameter of the outlet header as well as the aspect ratio of the evaporator is beneficial to improve the uniformity of refrigerant distribution. Doubling the inner diameter of the outlet header results in a decrease of 41.8% in the inhomogeneity;compared with the basic structure,the evaporator with an aspect ratio of 1.455 achieves a decrease of 21.6% in the refrigerant inhomogeneity. © 2023 Science Press. All rights reserved.
引用
收藏
页码:1641 / 1648
页数:7
相关论文
共 20 条
  • [1] LEBOUCHE M., Two-phase flow distribution in a compact heat exchanger, Proceeding of the Third International Conference on Compact Heat Exchanger, pp. 347-352, (2001)
  • [2] Evaporator-condenser improvement and impact on heat pump system performances for EVs[EB/OL]
  • [3] HRNJAK P., Flow distribution issues in parallel flow heat exchangers[J], ASHRAE Transactions, 110, 1, (2004)
  • [4] FEI P., Adiabatic developing two-phase refrigerant flow in manifolds of heat exchangers [D], (2004)
  • [5] HRNJAK P., Experimentally validated model of refrigerant distribution in a parallel microchannel evaporator[J], ASHRAE Transactions, 118, 1, (2012)
  • [6] HRNJAK P., Effect of the header pressure drop induced flow maldistribution on the microchannel evaporator performance [J], International Journal of Refrigeration, 36, 8, (2013)
  • [7] HRNJAK P., Effect of flash gas bypass on the performance of R134a mobile air-conditioning system with microchannel evaporator [J], SAE International Journal of Materials and Manufacturing, 4, 1, (2011)
  • [8] ZOU Y,, TUO H,, HRNJAK P., Modeling refrigerant maldistribution in microchannel heat exchangers with vertical headers based on experimentally developed distribution results [J], Applied Thermal Engineering, 64, 1, (2014)
  • [9] YUAN Pei, CHANG Hongxu, LI Dan, Et al., The flow distribution uniformity research on the microchannel parallel flow heat exchanger[J], Cryogenics and Superconductivity, 47, 3, (2019)
  • [10] ZHAO Lanping, WANG Renjie, LIU Guilan, Et al., Characteristics of refrigerant flow distribution in parallel microchannel evaporator [J], Journal of Tongji University (Natural Science), 47, 2, (2019)