Constructions of Intermediate Configuration in Sheet Forming Simulation

被引：0

作者：

Liu Y. ^{[1
,2
]}

Bao Y. ^{[1
]}

Qin X. ^{[3
]}

Liu Y. ^{[1
,2
]}

Chen W. ^{[1
]}

机构：

[1] Jiangsu Province Key Laboratory of Precision and Micro Manufacturing Technology, Nanjing University of Aeronautics and Astronautics, Nanjing

[2] School of Mathematics and Statistics, Qujing Normal University, Qujing, 655011, Yunnan

[3] Engineering Technology Associates, Nanjing

来源：

Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University | 2019年 / 53卷 / 06期

关键词：

Finite element method; Intermediate configuration; Pre-stressed membrane element; Sheet metal forming simulation;

D O I：

10.16183/j.cnki.jsjtu.2019.06.012

中图分类号：

学科分类号：

摘要：

The large time step static implicit finite element method (FEM) for sheet metal forming simulation is presented to alleviate the convergence problem of the traditional implicit incremental FEM, and the simulation process of sheet metal forming is divided into bending deformation and tensile deformation. According to constraints of positions between the blank and mold, the shape of bending deformation which is called intermediate configuration is calculated. Meanwhile, a method based on pre-stress membrane element for constructing an intermediate configuration is also proposed in this paper. In this method, the contact states of the blank nodes are determined by the contact algorithm. The contact zone of blank is determined by the shape of mold, the non-contact zone is calculated with iterations for equilibrium equations by the pre-stress membrane element. The result shows that the proposed algorithm could obtain the appropriate intermediate configurations quickly and provide precise surface sliding constraint for tensile deformation. © 2019, Shanghai Jiao Tong University Press. All right reserved.

引用

页码：713 / 718

页数：5

共 12 条

[1] Robert C., Delameziere A., Dal S.P., Et al., Comparison between incremental deformation theory and flow rule to simulate sheet-metal forming processes, Journal of Materials Processing Technology, 212, 5, pp. 1123-1131, (2012)
[2] Guo Y.Q., Batoz J.L., Naceur H., Recent deve-lopments on the analysis and optimum design of sheet metal forming parts using a simplified inverse approach, Computers & Structures, 78, 1-3, pp. 133-148, (2000)
[3] Ablat M.A., Qattawi A., Numerical simulation of sheet metal forming: A review, International Journal of Advanced Manufacturing Technology, 89, 1-4, pp. 1235-1250, (2017)
[4] Ahmed G.M.S., Ahmed H., Mohiuddin M.V., Et al., Experimental evaluation of springback in mild steel and its validation using LS-DYNA, Procedia Materials Science, 6, pp. 1376-1385, (2014)
[5] Kubliw, Reissner J., Optimization of sheet-metal forming processes using the special purpose program AUTOFORM, Journal of Materials Processing Technology, 50, 1-4, pp. 292-305, (1995)
[6] Lee C., Cao J., Shell element formulation of multi-step inverse analysis for axisymmetric deep drawing process, International Journal for Numerical Me-thods in Engineering, 50, 3, pp. 681-706, (2015)
[7] Guo Y.Q., Li Y., Abbes B., Et al., Damage Prediction in Metal Forming Process Modeling and Optimization: Simplified Approaches, (2015)
[8] Liu W., Hu P., Zhou P., Et al., Research on intermediate configurations of multi-step inverse approach in sheet metal forming, Journal of Mechanical Engineering, 48, 4, pp. 21-25, (2012)
[9] Zhang X., Wang F., Liu W., Et al., Solving algorithm of initial guess of intermediate configuration in multi-step inverse finite element, Journal of Mechanical Engineering, 51, 24, pp. 118-125, (2015)
[10] Shirin M.B., Assempour A., Some improvements on the unfolding inverse finite element method for simulation of deep drawing process, The International Journal of Advanced Manufacturing Technology, 72, 1-4, pp. 447-456, (2014)

← 1 2 →