Development trends in high-efficiency gas turbine cooling methods

被引：0
|
作者：
Ren J. [1 ]
Li X. [1 ]
Guo X. [1 ]
Wang S. [1 ]
Xu H. [1 ]
机构：
[1] Department of Energy and Power Engineering, Tsinghua University, Beijing
来源：
Qinghua Daxue Xuebao/Journal of Tsinghua University | 2022年 / 62卷 / 04期
关键词：
Air-cooled blade; Design method; Efficient cooling; Gas turbine;
D O I：
10.16511/j.cnki.qhdxxb.2022.25.019
中图分类号：
学科分类号：
摘要：
Gas turbines and aero engines are known as the jewels of the industrial crown and their development is an important symbol of a country's technological level and national strength. Turbine inlet temperatures are rapidly increasing to improve the turbine efficiency, so the turbine blades are being exposed to higher temperatures. Efficient blade cooling methods are then needed for the blades to work safely at temperatures much higher than the material melting point. This paper reviews the development of high-efficiency cooling methods for gas turbines and presents a three-dimensional research framework for gas turbine cooling methods. This paper also reviews the research results of the present authors on the flow and heat transfer characteristics of cooling units, blade cascades and multiple cooling component interactions. This paper then presents a design method for efficient experimental data-driven cooling structure design. The characteristics and development trends of next generation cooling methods using double wall cooling are also described. © 2022, Tsinghua University Press. All right reserved.
引用
收藏
页码：794 / 801
页数：7
相关论文
共 36 条
  • [1] BUNKER R S., Evolution of turbine cooling, Proceedings of ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, (2017)
  • [2] OWEN J M., Air-cooled gas-turbine discs: A review of recent research, International Journal of Heat and Fluid Flow, 9, 4, pp. 354-365, (1988)
  • [3] HAN J C., Turbine blade cooling studies at Texas A&M University: 1980-2004, Journal of Thermophysics and Heat Transfer, 20, 2, pp. 161-187, (2006)
  • [4] EKKAD S V, HAN J C, DU H., Detailed film cooling measurements on a cylindrical leading edge model: Effect of free-stream turbulence and coolant density, Journal of Turbomachinery, 120, 4, pp. 799-807, (1998)
  • [5] TENG S Y, HAN J C, POINSATTE P E., Effect of film-hole shape on turbine-blade heat-transfer coefficient distribution, Journal of Thermophysics and Heat Transfer, 15, 3, pp. 249-256, (2001)
  • [6] HUANG Y Z, EKKAD S V, HAN J C., Detailed heat transfer distributions under an array of orthogonal impinging Jets, Journal of Thermophysics and Heat Transfer, 12, 1, pp. 73-79, (1998)
  • [7] LIU Z, FENG Z P., Numerical simulation on the effect of jet nozzle position on impingement cooling of gas turbine blade leading edge, International Journal of Heat and Mass Transfer, 54, 23-24, pp. 4949-4959, (2011)
  • [8] HAN C, CHI Z R, YIN H, Et al., Unsteady characteristic of film cooling and phantom cooling on the first stage of a gas turbine: Part 1-vane cascade, Journal of Engineering Thermophysics, 34, 5, pp. 845-848, (2013)
  • [9] XU R N, LI X Y, LIAO Z Y, Et al., Research progress in transpiration cooling with phase Change, Journal of Tsinghua University (Science and Technology), 61, 12, pp. 1341-1352, (2021)
  • [10] YIN H, WANG W P, REN J, Et al., Research on the effect of combustor outlet radiation on the film cooling heat transfer, Journal of Engineering Thermophysics, 33, 2, pp. 214-217, (2012)
1234