Experimental study the mechanical properties of nano composite materials by using multi-metallic nano powder/epoxy

被引：0

作者：

Abbud L.H. ^{[1
]}

Al-Masoudy M.M.M. ^{[1
]}

Hussien Omran S. ^{[2
]}

Abed A.M. ^{[1
]}

机构：

[1] Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon

[2] Energy and Renewable Energies Technology Center, University of Technology

来源：

Materials Today: Proceedings | 2023年 / 80卷

关键词：

Mechanical properties; Nano Aluminum; Nano Titanium; Volume fraction;

D O I：

10.1016/j.matpr.2021.06.395

中图分类号：

学科分类号：

摘要：

The mechanical properties of two commercial epoxides have been investigated in both unfilled and filled with varying the weight fraction of Nano Aluminum powder and Nano Aluminum with Nano Titanium powder. The values of Young's modulus, modulus of rigidity, yield stress, tensile strength, flexural strength have been studied at room temperature to identify the specific influence of Aluminum powder (the particle size for Aluminum powder is less than or equal to 50 nm (d ≤ 50). The weight fraction has different values (equals to 10%, 20% and 30%), and Nano Aluminum with Nano Titanium powder for Aluminum powder, the particle size (d) is less than or equal to 50 nm (d ≤ 50). The weight fraction has different values (equals to 10%, 20% and 30%). Also for Titanium powder, the particle size is less than or equal to 50 nm (d ≤ 50), and the weight fraction is 1% for each different weight fractions of Aluminum powder to epoxy resin. The experimental results obtained from laboratory have been analyzed in order to achieve the best result. It is concluded that Young's modulus and modulus of rigidity increase when the weight fraction for Nano Aluminum powder and Nano Aluminum with Nano Titanium powder increase. © 2021

引用

页码：2495 / 2500

页数：5

共 50 条

[1] Evaluation of Mechanical Properties for Epoxy Resin in Nano Composite Diffusion
Bharadwaja, K.
Srinivasa Rao, Sreeram
Babu Rao, T.
Pydi, Hari Prasadarao
Advances in Materials Science and Engineering, 2023, 2023
[2] Study on the Properties of Microwave Curing Epoxy Resin/nano-Fe Composite Materials
Sun, Xiaofeng
Ma, Shining
He, Jiawu
Zhu, Naishu
ADVANCED MECHANICAL ENGINEERING, PTS 1 AND 2, 2010, 26-28 : 356 - +
[3] Electrical Properties Analysis of Micro and Nano Composite Epoxy Resin Materials
Castellon, J.
Nguyen, H. N.
Agnel, S.
Toureille, A.
Frechette, M.
Savoie, S.
Krivda, A.
Schmidt, L. E.
IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, 2011, 18 (03) : 651 - 658
[4] Nano-mechanical creep properties of nanoclay/epoxy composite by nanoindentation
Lam, Chun Ki
Lau, Kin Tak
Zhou, Li Min
ADVANCES IN COMPOSITE MATERIALS AND STRUCTURES, PTS 1 AND 2, 2007, 334-335 : 669 - +
[5] Mechanical Property of Nano-particles Reinforced Epoxy Resin Composite Materials
Lv, Xinying
Sun, Yong
Jiang, Zhicheng
Zhang, Yanhua
Di, Mingwei
ADVANCED MATERIALS SCIENCE AND TECHNOLOGY, PTS 1-2, 2011, 181-182 : 99 - 102
[6] An experimental study for using nano-alumina to improving mechanical properties of epoxy resin for assembling glass artifacts
Eloriby, Rania Abdel Gwad
Mohamed, Hamdy Mohamed
PIGMENT & RESIN TECHNOLOGY, 2025, 54 (01) : 65 - 72
[7] Experimental Study on the Mechanical Properties of Green Lightweight Cement Composite Modified by Nano Additives
Du, Yiying
Korjakins, Aleksandrs
ENVIRONMENTAL AND CLIMATE TECHNOLOGIES, 2023, 27 (01) : 878 - 888
[8] Moisture Effects on Nano-mechanical Properties of Epoxy-based Materials
Lau, Denvid
2013 13TH IEEE CONFERENCE ON NANOTECHNOLOGY (IEEE-NANO), 2013, : 925 - 928
[9] EXPERIMENTAL STUDY OF NANO-COMPOSITE MATERIALS ON VIBRATION RESPONSES
Mobark H.F.H.
Fadhel E.Z.
Hussein M.T.
Mohamad B.
Diagnostyka, 2023, 24 (03):
[10] INVESTIGATION OF INFLUENCE OF NANO-REINFORCEMENT ON THE MECHANICAL PROPERTIES OF COMPOSITE MATERIALS
Kononova, Olga
Krasnikovs, Andrejs
Stonys, Rimvydas
Sahmenko, Genadijs
Vitols, Renars
JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT, 2016, 22 (03) : 425 - 433

← 1 2 3 4 5 →