Experimental study on demolishing steel reinforced concrete components by induction heating

被引：0
|
作者：
Xu C.-H. [1 ,2 ]
Zheng W.-Z. [1 ,2 ]
Hu M.-L. [1 ,2 ]
Wang Y. [1 ,2 ]
机构：
[1] Key Lab of Structures Dynamic Behavior and Control (Harbin Institute of Technology), Ministry of Education, Harbin
[2] Key Lab of the Smart Prevention and Mitigation of Civil Engineering Disasters (Harbin Institute of Technology), Ministry of Industry and Information Technology, Harbin
来源：
Gongcheng Lixue/Engineering Mechanics | 2022年 / 39卷 / 04期
关键词：
Differential expansion; Experimental study; Induction heating; Steel reinforced concrete structure; Temperature rise curve;
D O I：
10.6052/j.issn.1000-4750.2021.01.0099
中图分类号：
学科分类号：
摘要：
In the process of induction heating, the steel is heated directly by electromagnetic induction while the concrete is heated by heat conduction. The temperature and deformation differences between the steel and concrete are produced, which provide the possibility for the separation between the steel and the concrete. The induction heating separation tests of six steel reinforced concrete specimens without protective layers and eight steel reinforced concrete specimens with protective layers were carried out. The test results show that the trend of the temperature rise curve of the steel in different specimens is basically the same. When the temperature of the steel is below 450 ℃, the temperature rise of the steel is fast and the rate is approximately 30 ℃/min ~ 50 ℃/min. When the steel temperature is between 450 ℃ ~ 700 ℃, the steel temperature rise slows down and the rate becomes approximately 20 ℃/min ~ 30 ℃/min. When the steel temperature reaches 700 ℃, the steel temperature rises gently. When the steel temperature is no higher than 700 ℃, the temperature and expansion differences between the steel and the concrete increase linearly. The expansion difference between the section steel and concrete is mainly related to the height of the section steel web. When the height of section steel web is 300 mm and the expansion difference is not less than 1.80 mm, it is convenient to separate the section steel from the concrete. When the height of section steel web is 400 mm and the expansion difference is not less than 2.12 mm, it is also convenient to separate the section steel from the concrete. Copyright ©2022 Engineering Mechanics. All rights reserved.
引用
收藏
页码：100 / 112
页数：12
相关论文
共 24 条
  • [1] Zhang Yuehong, Research on the numerical simulation of temperature field in induction heating, (2008)
  • [2] Leuca Teodor, Vladu Ecaterina, Novac Mihaela, Et al., Optimal design of induction heating devices via FEM and metamodeling, Revue Roumaine Des Sciences Techniques, 58, 2, pp. 135-144, (2013)
  • [3] Liu Wenwen, Feng Yanfeng, Yang Tingsong, Et al., Analysis of the induction heating efficiency and thermal energy conversion ability under different electromagnetic stick structures in the RPECT, Applied Thermal Engineering, 145, pp. 277-286, (2018)
  • [4] Medve D, Jan Zbojovsk, Marek Pavlik, Et al., Additional modification of thermomagnetic properties of objects of low relative permeability in electromagnetic field, Acta Physica Polonica A, 131, 4, pp. 1138-1140, (2017)
  • [5] Hu Junhao, Application and research on heating technology of electromagnetic inductor, Technology Innovation Report, 13, 28, pp. 50-51, (2016)
  • [6] Zhao Qianzhe, Liu Yibing, Liu Yanping, Et al., Numerical analysis for induction heating process of ferromagnetic materials, Transactions of Materials and Heat Treatment, 33, 3, pp. 151-155, (2012)
  • [7] He Liang, Zhao Long, Ling Tianqing, Et al., Research on induction heating activated self-healing of cracks in dense graded asphalt mixture, China Journal of Highway and Transport, 30, 1, pp. 17-24, (2017)
  • [8] Xu Yueming, Li Qiao, Luo Xinmin, Et al., Technology progress in heat treatment, Heat Treatment of Metals, 40, 9, pp. 1-15, (2015)
  • [9] Xiao Jianzhuang, Chen Lihao, Ye Jianjun, Et al., Technology and green development of demolition for concrete structures, Journal of Architecture and Civil Engineering, 36, 5, pp. 1-10, (2019)
  • [10] Zhang Jingtao, Yang Kaiming, Demolition Method for Lowering Building Floor" applied to high-rise building demolition, Building Construction, 38, 10, pp. 1444-1446, (2016)
123