Pyrolysis of Saccharum munja: Optimization of process parameters using response surface methodology (RSM) and evaluation of kinetic parameters

被引:39
|
作者
Kumar M. [1 ]
Mishra P.K. [1 ]
Upadhyay S.N. [1 ]
机构
[1] Department of Chemical Engineering &Technology, IIT (BHU) Varanasi, Varanasi
关键词
Bio-oil; Multiple-linear regression and Coats-Redfern method; Saccharum munja; TGA/DTG analysis;
D O I
10.1016/j.biteb.2019.100332
中图分类号
学科分类号
摘要
Saccharum munja, a ligno-cellulosic biomass, is a perennial grass that grows in Africa, Australia, South America and the Indian subcontinent. It can serve as an abundant source of renewable energy. Its thermochemical characteristics and thermal degradation behaviour have been investigated for the first time. It has high volatile matter (80.70%), low fixed carbon (10.91%), and good HHV (19.67 MJ/kg). Its C, H, O, and N contents are 63.29, 7.84, 27.19, and 2.34%, respectively. The TGA/DTA analyses are performed at a heating rate of 15 °C/min from ambient temperature to 1000 °C and pyrolysis from 450 to 600°C. The central composite design (CCD) and response surface methodology have been used to optimize the effects of temperature and time on the bio-oil yield. At the optimum conditions (T = 525 °C, t = 60 min), the bio-oil yield has been found to be 46.00%. The oxygenated aliphatic and aromatic compounds majorly comprise the bio-oil. Kinetic parameters are evaluated using multiple-linear regression and Coats-Redfern methods. © 2019
引用
收藏
相关论文
共 50 条
  • [1] Optimization of Bentocrete parameters using Response Surface Methodology (RSM)
    Reddy, M. Achyutha Kumar
    Rao, V. Ranga
    Chaitanya, K. Naga
    Khed, Veerendrakumar C.
    AIMS MATERIALS SCIENCE, 2021, 8 (02) : 221 - 246
  • [2] Optimization of sunflower oil bleaching parameters: using Response Surface Methodology (RSM)
    Sedaghat Boroujeni, Leila
    Ghavami, Mehrdad
    Piravi Vanak, Zahra
    Ghasemi Pirbalouti, Abdollah
    FOOD SCIENCE AND TECHNOLOGY, 2020, 40 : 322 - 330
  • [3] Optimization of cyclic parameters for ORC system using response surface methodology (RSM)
    Goyal, Ashwni
    Sherwani, Ahmad Faizan
    Tiwari, Deepak
    ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2021, 43 (08) : 993 - 1006
  • [4] OPTIMIZATION OF PROCESS PARAMETERS FOR REMOVAL OF Cr(VI) BY HYPNUM CUPRESSIFORME USING RESPONSE SURFACE METHODOLOGY (RSM)
    Ozkan, Esra
    Gurses, Ahmet
    Acikyildiz, Metin
    Gunes, Kubra
    FRESENIUS ENVIRONMENTAL BULLETIN, 2012, 21 (11B): : 3421 - 3423
  • [5] Optimization of process parameters using response surface methodology: A review
    Chelladurai, Samson Jerold Samuel
    Murugan, K.
    Ray, Abhra Pratip
    Upadhyaya, Makarand
    Narasimharaj, Venugopal
    Gnanasekaran, S.
    MATERIALS TODAY-PROCEEDINGS, 2021, 37 : 1301 - 1304
  • [6] Optimization of process parameters by response surface methodology (RSM) for catalytic pyrolysis of waste high-density polyethylene to liquid fuel
    Kumar, Sachin
    Singh, R. K.
    JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, 2014, 2 (01): : 115 - 122
  • [7] EnZolv delignification of cotton spinning mill waste and optimization of process parameters using response surface methodology (RSM)
    Subramaniam, Santhoshkumar
    Karunanandham, Kumutha
    Raja, A. S. M.
    Shukla, S. K.
    Uthandi, Sivakumar
    BIOTECHNOLOGY FOR BIOFUELS AND BIOPRODUCTS, 2024, 17 (01):
  • [8] EnZolv delignification of cotton spinning mill waste and optimization of process parameters using response surface methodology (RSM)
    Santhoshkumar Subramaniam
    Kumutha Karunanandham
    A. S. M. Raja
    S. K. Shukla
    Sivakumar Uthandi
    Biotechnology for Biofuels and Bioproducts, 17
  • [9] Optimisation of Process Parameters on Thin Shell Part Using Response Surface Methodology (RSM)
    Faiz, J. M.
    Shayfull, Z.
    Nasir, S. M.
    Fathullah, M.
    Rashidi, M. M.
    3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
  • [10] Optimization of the Parameters of the Magnetic Filtration Process Using Response Surface Methodology
    Yildiz, Zehra
    TRANSPORT IN POROUS MEDIA, 2011, 90 (03) : 965 - 975