Modified discrete numerical model for reinforced concrete structures

被引：0
|
作者：
Zeng F. [1 ,2 ]
Feng X. [3 ]
Huang C. [1 ,2 ]
Xu Q. [1 ,2 ]
Xiao G. [1 ,2 ,4 ]
Tian R. [1 ,2 ]
机构：
[1] CAEP Software Center for High Performance Numerical Simulation, Beijing
[2] Institute of Applied Physics and Computational Mathematics, Beijing
[3] Institute of Systems Engineering, China Academy of Engineering Physics, Sichuan, Mianyang
[4] School of Science, Nanjing University of Science and Technology, Jiangsu, Nanjing
来源：
Baozha Yu Chongji/Explosion and Shock Waves | 2022年 / 42卷 / 06期
关键词：
bond-slip; concrete; explosion load; reinforcement bar;
D O I：
10.11883/bzycj-2021-0286
中图分类号：
学科分类号：
摘要：
The interaction between rebar and concrete must always be considered to well describe and predict the mechanical behavior of reinforced concrete (RC) structures. A common way to model RC structures is by discrete reinforcements in finite element models where the discrete reinforcements imply that bond conditions between rebar and concrete are perfect. In order to take into account the bond-slip phenomenon, a modified discrete numerical model for RC structures is presented in this paper. The model is formulated within the framework of the mixture theory, considering two phases corresponding to the matrix concrete and the reinforcement bars and incorporating bond-slip effects to the stress-strain relation of the latter by considering the bond-slip model recommended by CEB-FIB. A nonlinear equivalent stress-strain relation for discrete steel bars is generated by incorporating the bond-slip strain to the strain of bars. Based on this model, a comprehensive parametric study is accomplished to obtain the influence of the parameters, including the strengths of the concrete and steel bars as well as the diameter of bars on the modified stress-strain relation of the discrete steel bars. In comparison to the traditional discrete numerical model where interface elements are generated via connecting the degrees of freedom of the bars and concrete meshing, the new model allows for the slipping of the steel bars without explicit discretization of the steel bars and the steel/concrete interfaces. This fact makes it attractive for numerical simulation of concrete structures at the macrostructural level. Using a code JUST-PANDA that is developed in-house, the model is verified by the explosion experiments at the component level and the structural level respectively. The comparisons with experimental results show that the new model can provide a more reliable prediction of the concrete structural behavior due to the consideration of the bond-slip effects in the stress-strain relation of the discrete steel bars by means of a simple procedure. © 2022 Explosion and Shock Waves. All rights reserved.
引用
收藏
相关论文
共 27 条
  • [1] MARKOU G, PAPADRAKAKIS M., An efficient generation method of embedded reinforcement in hexahedral elements for reinforced concrete simulations [J], Advances in Engineering Software, 45, 1, pp. 175-187, (2012)
  • [2] LI Y, LU X Z, REN A Z, Et al., Simulation for fire-induced progressive collapse of an 8-storey rc frame structure [J], Engineering Mechanics, 28, S1, pp. 53-59, (2011)
  • [3] DEHESTANI M, MOUSAVI S S., Modified steel bar model incorporating bond-slip effects for embedded element method [J], Construction and Building Materials, 81, pp. 284-290, (2015)
  • [4] WU H J, HUANG F L, FU Y S, Et al., Numerical simulation of reinforced concrete breakage under internal blast loading [J], Transactions of Beijing Institute of Technology, 27, 3, pp. 200-204, (2007)
  • [5] SHI Y C, LI Z X., Dynamic responses and failure modes of RC columns under blast loading [J], Journal of Building Structures, 29, 4, pp. 112-117, (2008)
  • [6] WANG W, ZHANG D, LU F Y, Et al., Anti-explosion performances of square reinforced concrete slabs under close-in explosions [J], Explosion and Shock Waves, 32, 3, pp. 251-258, (2012)
  • [7] WANG W, YANG J C, WANG J H, Et al., Experimental investigation of polyisocyanate-oxazodone coated square reinforced concrete slab under contact explosions, International Journal of Impact Engineering, 149, (2021)
  • [8] YU X, ZHOU B K, HU F, Et al., Experimental investigation of basalt fiber-reinforced polymer (BFRP) bar reinforced concrete slabs under contact explosions, International Journal of Impact Engineering, 144, (2020)
  • [9] NING J G, MENG F L, MA T B, Et al., Failure analysis of reinforced concrete slab under impact loading using a novel numerical method, International Journal of Impact Engineering, 144, (2020)
  • [10] SHI Y C, WANG J, CUI J., Experimental studies on fragments of reinforced concrete slabs under close-in explosions, International Journal of Impact Engineering, 144, (2020)
123