Pressure Precisely Control of Master Cylinder on Integrated-electro- hydraulic Brake System Considering the Critical Nonlinear Characteristics

被引：5
|
作者：
Xiong L. [1 ,2 ]
Han W. [1 ,2 ]
Yu Z. [1 ,2 ]
Li H. [1 ,2 ]
机构：
[1] School of Automotive Studies, Tongji University, Shanghai
[2] Institute of Intelligent Vehicles, Clean Energy Automotive Engineering Center, Tongji University, Shanghai
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2019年 / 55卷 / 24期
关键词：
Dead zone; Friction; Integrated-electro-hydraulic brake system(IEHB); LuGre friction model; Pressure control of master cylinder; Pressure-volume characteristic(PV);
D O I：
10.3901/JME.2019.24.117
中图分类号：
学科分类号：
摘要：
A decoupling electro-hydraulic brake system (EHB) with the form of”electric motor + reduction gear”is studied, and a pressure controller of master cylinder considering the critical nonlinear characteristics (friction, PV) is designed to cope with the pressure creeping, deadzone and oscillation. Based on the LuGre model, an adaptive pressure controller is designed to compensate for the friction. Faced with the issues with using the pressure-based closed-loop controller at the operating point of the dead zone of the system, a nonlinear control algorithm based on dead-zone compensation is adopted. Combining the advantages of the above two controllers, a joint controller based on LuGre-model feedforward compensation and dead-zone compensation is developed. The pressure of the master cylinder can be accurately controlled considering the key nonlinear characteristics of the system. The analysis of the time- and frequency-domain characteristics of each closed-loop system is verified via the co-simulations (AMESim&Simulink) and the hardware-in-the-loop tests (HIL). The pressure-tracking dynamic accuracy and response speed using the joint controller is improved by comparison tests. © 2019 Journal of Mechanical Engineering.
引用
收藏
页码：117 / 126
页数：9
相关论文
共 25 条
  • [1] Yu Z., Han W., Xu S., Et al., Review on hydraulic pressure control of electro-hydraulic brake system, Journal of Mechanical Engineering, 53, 14, pp. 1-15, (2017)
  • [2] Kreutz S., Lingg M., Ideal regeneration with electromechanical brake booster (eBKV) in Volkswagen e-up! and Porsche 918 Spyder, Proceedings of 5th international Munich Chassis Symposium, pp. 549-588, (2014)
  • [3] Feigel H.O.R., Integrated brake system without compromises in functionality, ATZ Worldwide, 114, pp. 46-50, (2012)
  • [4] Duval-Destin M., Kropf T., Abadie V., Et al., Effects of an electric actuator to the brake system, ATZ Worldwide, 113, pp. 638-643, (2011)
  • [5] Oshima T., Fujiki N., Nakao S., Et al., Development of an electrically driven intelligent brake system, SAE Int. J. Passeng. Cars-Mech. Syst., 4, pp. 399-405, (2011)
  • [6] De Castro R., Todeschini F., Araujo E., Et al., Adaptive-robust friction compensation in a hybrid brake-by-wire actuator, Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 228, 10, pp. 769-786, (2014)
  • [7] Xiong L., Yuan B., Guang X., Et al., Analysis and design of dual-motor electro-hydraulic brake system, SAE 2014 World Congress& Exhibition
  • [8] Yu Z., Xu S., Xiong L., Et al., An integrated-electro-hydraulic brake system for active safety, SAE 2016 World Congress& Exhibition
  • [9] Wang Z., Yu L., Wang Y., Et al., Prototype of distributed electro-hydraulic braking system and its fail-safe control strategy, SAE 2013 World Congress& Exhibition
  • [10] Chen P., Wu J., Zhao J., Et al., Design and position control of a novel electric brake booster, SAE World Congress Experience 2018, (2018)
123