Dynamic characteristics and parametric sensitivity of engine air spring hydraulic mount

被引：0

作者：

Hou S. ^{[1
,2
]}

Yang W. ^{[3
]}

机构：

[1] School of Vehicle and Traffic Engineering, Henan Institute of Technology, Xinxiang

[2] China Automotive Technology and Research Center Co., Ltd., Tianjin

[3] Dongfeng Commercial Vehicle Technical Center, Wuhan

来源：

Zhendong yu Chongji/Journal of Vibration and Shock | 2019年 / 38卷 / 21期

关键词：

Air spring hydraulic mount; Automobile engine; Dynamic characteristics; Parametric sensitivity;

D O I：

10.13465/j.cnki.jvs.2019.21.025

中图分类号：

学科分类号：

摘要：

Aiming at dynamic characteristics and parametric sensitivity of automobile engine air spring hydraulic mount, the equivalent volume stiffness of the mount's upper liquid chamber was used to replace effects of decoupling membrane and closed air chamber on the mount's dynamic characteristics. Based on the corresponding theory of fluid mechanics, the mount's mechanical model was established. The correctness of the model was verified with tests. Dynamic characteristics of air spring were analyzed when air chamber was opened and closed. The model was used to study effects of air spring hydraulic mount's parameters, such as, rubber main spring's volume stiffness, damping coefficient and equivalent piston area, equivalent volume stiffness of upper liquid chamber when air chamber is opened and closed, liquid inertia coefficient and damping one of inertial channel on the mount's dynamic stiffness and damping angle to obtain these parameters' sensitivities to the mount's dynamic stiffness. It was shown that the study results are helpful for optimizing design of the mount's dynamic characteristics, shortening its R&D period and saving its R&D costs. © 2019, Editorial Office of Journal of Vibration and Shock. All right reserved.

引用

页码：178 / 185

页数：7

共 11 条

[1] Lee Y.W., Lee C.W., Dynamic analysis and control of an active engine mount system, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216, pp. 921-931, (2002)
[2] Shibayama T., Ito K., Gami T., Et al., Active engine mount for a large amplitude of idling vibration
[3] Sun L., Fan W., Research of development of the engine mount, Internal Combustion Engines, 6, 3, pp. 19-22, (2010)
[4] Shi W., Lin Y., Lu Z., Et al., A study on hydraulic engine mounting isolation characteristics for Audi100 car, Journal of Jinlin University of Technology, 26, 1, pp. 10-15, (1996)
[5] Qin M., Lin Y., Ma T., Et al., A Study on dynamic characteristic of hydraulic mount system, Automotive Engineering, 23, 6, pp. 381-384, (2001)
[6] Shi W., Hou S., Wang X., Et al., Vibration isolation performance and fuzzy PID control method of magneto-rheological fluid engine mount, Transactions of the Chinese Society of Agricultural Engineering, 28, 20, pp. 50-57, (2012)
[7] Azadi M., Behzadipour S., Faulkner G., Performance analysis of a semi-active mount by a new variable stiffness spring, Journal of Sound and Vibration, 330, pp. 2733-2746, (2011)
[8] Fan R., Zhang X., Study on semi-active hydraulic mount with variable-stiffness decoupling membrane, Journal of Mechanical Engineering, 51, 14, pp. 108-114, (2015)
[9] Yang W., Shi W., Ma L., Et al., An experimental study on the hydraulic mount parameters of automotive powertrain, Automotive Engineering, 36, 7, pp. 894-898, (2014)
[10] Lu Z., Shangguan W., Liang W., Et al., Experimental methods and test evaluation for the dynamic characteristics of hydraulically damped rubber mount, China Mechanical Engineering, 15, 2, pp. 182-186, (2004)

← 1 2 →