Numerical analysis of weld pool fluctuation behavior induced by droplet transfer in twin-wire GMAW

被引：0
|
作者：
Pan J. [1 ]
He X. [1 ]
Zhao P. [1 ]
Hu Y. [1 ]
Liang Y. [2 ]
机构：
[1] Qingdao University of Science and Technology, Qingdao
[2] Shanghai University of Engineering Science, Shanghai
来源：
Hanjie Xuebao/Transactions of the China Welding Institution | 2020年 / 41卷 / 08期
关键词：
Droplet impingement; Pulsed twin-wire GMAW; Wave behavior; Weld pool surface;
D O I：
10.12073/j.hjxb.20200131001
中图分类号：
学科分类号：
摘要：
The dynamic fluctuation behavior of the free surface of molten pool during pulsed twin wire GMAW was studied. Based on the two-dimensional wave theory, the transient mathematical model of the shock vibration of molten pool surface and the two-dimensional wave behavior resulting from it are established. The governing differential equation is derived. The corresponding initial and boundary conditions are given, and the numerical analysis is carried out by programming. The displacement and vibration velocity distribution of the free surface of the molten pool, the instantaneous fluctuation of the free surface of the molten pool under different droplet transition conditions and the interference caused by the surface fluctuation during welding are obtained. The results show that the surface wave mainly originates near the center of the front wire and the back wire, resulting in a strong depression on the surface of the molten pool. The welding wire with diameter of 1.0 mm can reduce the surface fluctuation of molten pool and prevent the occurrence of coarse weld ripple; When the droplet transfer frequency is 1 000 Hz, defects such as rough welding ripple and undercut are easy to appear. The fluctuation interference decreases with the decrease of droplet transfer frequency. The work in this paper can provide basic data and theoretical guidance for the industrial production of pulsed twin wire GMAW and the optimization of welding parameters. Copyright © 2020 Transactions of the China Welding Institution. All rights reserved.
引用
收藏
页码：90 / 96
页数：6
相关论文
共 16 条
  • [1] Li Fang, Hua Xueming, Wu Yixiong, Research status and development of pulse fusion electrode gas shielded welding, Hot Working Technology, 36, 15, pp. 84-87, (2007)
  • [2] Wang Zhenmin, Zhao Pengcheng, Xue Jiaxiang, Influence of GMAW droplet transition on weld shape, Journal of South China University of Technology (Natural Science Edition), 8, (2008)
  • [3] Chen Dongsheng, Chen Maoai, Wu Chuansong, Effect of phase difference on arc stability and weld quality of tandem P-GMAW, Transactions of the China Welding Institution, 37, 4, pp. 123-127, (2016)
  • [4] Xiao Lei, Fan Ding, Zheng Falei, Droplet transition behavior and control of high current GMAW, Journal of South China University of Technology (Natural Science Edition), 4, (2019)
  • [5] Wang Ying, Lu Xiaoqing, Jing Hongyang, Stability analysis of short circuit transition process based on GMAW dynamic model, Transactions of the China Welding Institution, 37, 8, pp. 21-25, (2016)
  • [6] Zhang Shiliang, Xu Guoxiang, Cao Qingnan, Numerical analysis model of GMAW welding pool dynamic behavior based on FLUENT software, Transactions of the China Welding Institution, 39, 2, pp. 75-79, (2018)
  • [7] Xiaoqing Lu, Peng Zhang, Jun Shen, Analysis of weld pool vibration characteristics in pulsed gas metal arc welding[J], China Welding, 28, 4, (2019)
  • [8] Wu Dongsheng, Hua Xueming, Ye Dingjian, Numerical analysis of humping formation in high speed GMAW process, Transactions of the China Welding Institution, 37, 10, (2016)
  • [9] Hu J, Tsai H L., Heat and mass transfer in gas metal arc welding. Part I: the arc, International Journal of Heat Mass Transfer, 50, 5, pp. 833-846, (2006)
  • [10] Hu J, Tsai H L., Heat and mass transfer in gas metal arc welding. Part II: the metal, International Journal of Heat Mass Transfer, 50, 5, pp. 808-820, (2006)
12