Mechanism of "hole-protecting and pressure relief" drilling in soft coal seam

被引：0
|
作者：
Wang Y. [1 ,2 ,4 ]
Lu Y. [1 ]
Wang Z. [1 ]
Sun Y. [1 ,4 ]
Liu C. [3 ]
Song W. [1 ]
机构：
[1] School of Energy Science and Engineering, Henan Polytechnic University, Jiaozuo
[2] School of Safety Engineering, China University of Mining and Technology, Xuzhou
[3] IoT Perception Mine Research Center, China University of Mining & Technology, Xuzhou
[4] Collaborative Innovation Center of Coal Work Safety, Jiaozuo
来源：
| 1600年 / China Coal Society卷 / 45期
关键词：
Drilling technology along seam; Gas drainage; Hole-protecting drill pipe; Soft coal seam; The drilling drag;
D O I：
10.13225/j.cnki.jccs.2019.0779
中图分类号：
学科分类号：
摘要：
There is high drilling drag and low drilling efficiency for the drilling using casing-pipe drilling tool in soft coal seam.A new drilling technology with dual functions of hole-protecting and pressure relief was proposed in this study.The mechanical models of rotation drag torque and axial drag were established con-sidering confining pressure pi surrounding borehole.In addition,the hole-protecting numerical model was established.The defects of casing-pipe drilling technology were analyzed,and the principles of pressure relief and drag reduction were studied on new drilling technology.Result shows that when the casing-pipe drill pipe is applied to the drilling operation in soft coal seam,the rotation drag torque and axial drag are more than the drill rig rating for the range of the shallower drilling depth,then the drill pipe can't rotate and retreat,and the drilling will be terminated.By designing hole or space structure on the casing-pipe drill pipe surface to form a new hole-protecting drill pipe,it provides an advantage in deducing the contact area with borehole wall.A "pressure-released area" is formed on the surface of the drill pipe,which can effectively release the expansion stress of the coal around the drill pipe,and the rotating drill pipe continuously removes the expansion coal,thereby reducing the rotation drag of the drill pipe.The hole-protecting area ratio Sk is presented in this paper,and used to indicate the hole or space structure area on the drill pipe surface.The rotation drag torque and axial drag decrease by as much as 50% with the reduction of hole-protecting area ratio Sk.It is equivalent to reducing the power loss of the drilling rig and effectively increasing the drilling depth of the soft coal seam.Based on the research result,a spiral hole-protecting drill pipe model and porous structure hole-protecting drill pipe model were constructed.In practical applications,combined with the mechanical parameters of coal and rock at the construction site,a reasonable design of the hole-protecting area ratio Sk is the key to the structural design of the hole-protecting drill pipe. © 2020, Editorial Office of Journal of China Coal Society. All right reserved.
引用
收藏
页码：3186 / 3194
页数：8
相关论文
共 21 条
  • [1] (2013)
  • [2] SHI Wen, SHEN Ruichen, QU Ping, Et al., Geological adaptability analysis of PE screen pipes for coalbed mechane CBM well completion, Natural Gas Industry, 33, 4, pp. 85-90, (2013)
  • [3] YUAN Liang, QIN Yong, CHENG Yuanping, Et al., Scenario predication for medium-long term scale of coal mine methane drainage in China, Journal of China Coal Society, 38, 4, pp. 529-534, (2013)
  • [4] WANG Zhen, LIANG Yunpei, JIN Hongwei, Analysis of mechanics conditions for instability of outburst preventing borehole, Journal of Mining & Safety Engineering, 25, 4, pp. 444-448, (2008)
  • [5] WANG Yonglong, SUN Yuning, WANG Zhenfeng, Et al., Study on the mechanical characteristic of borehole clogging drilling in soft and outburst coal seam, Journal of China Coal Society, 40, S1, pp. 119-125, (2015)
  • [6] SUN Yuning, WANG Yonglong, ZHAI Xinxian, Et al., Analysis on reasons of drilling difficulty in soft and outburst coal seam, Journal of China Coal Society, 37, 1, pp. 117-121, (2012)
  • [7] WANG Kaibin, YSDC mine-used electromagnetic wave measurement while drilling system and its application in air drilling for soft coal seam, Safety in Coal Mines, 50, 7, pp. 153-156, (2019)
  • [8] ZHANG Jie, WANG Yi, HUANG Hanjing, Et al., Research on directional drilling technology of air srew motor in soft coal seam, Coal Science and Technology, 46, 11, pp. 114-118, (2018)
  • [9] LIU Yong, LI Qian, YAO Aiguo, Et al., Foam drilling tests and analysis in soft coal mines[J], Chemistry and Technology of Fuels and Oils, 53, 2, pp. 242-247, (2017)
  • [10] ZHAO Jianguo, YANG Huwei, Application of high speed auger drilling technology in soft coal seam, Safety in Coal Mines, 48, 8, pp. 121-124, (2017)
123