Experiment on bonding behavior of CFRP-steel interface with load history

被引:0
|
作者
Xu B. [1 ]
Yao Y. [1 ]
Qian Y. [2 ]
Ma M. [3 ]
Song S. [4 ]
机构
[1] Transportation Institute, Inner Mongolia University, Hohhot
[2] School of Civil Engineering, Southwest Jiaotong University, Chengdu
[3] CCCC First Highway Consultants Co., Ltd., Xi'an
[4] College of Architecture and Civil Engineering, Taiyuan University of Technology, Taiyuan
关键词
Bond-slip constitutive relations; Bonding behavior; CFRP-steel interface; Creep damage; Steel structure; Ultimate bond strength;
D O I
10.11918/201905011
中图分类号
学科分类号
摘要
To investigate the effects of load history on the bonding properties of carbon fiber reinforced polymer (CFRP) steel interface, long-term loading tests of CFRP-steel plate double-lap specimens were conducted under four interfacial shear stress levels and six types on loading time, and static tensile tests were carried out on the specimens which reached the specified loading time. Based on the axial strain data of CFRP, the distribution of interfacial shear stress and bond-slip curves were given. In view of the effect of interfacial creep damage on the bond-slip constitutive relations, coefficients β, η, and γ were introduced into bilinear model, and corresponding expressions were obtained by regression analysis. Results show that the creep deformation of the adhesive caused the redistribution of the interfacial stress. With the increase of time, the peak value of interfacial shear stress decreased and the strain of CFRP increased. After loading for 90 days, the interfacial shear stress of the specimens in groups B, C, D, and E at 12.5 mm decreased by 26.6%, 59.2%, 73.8%, and 85.4%, respectively. When the level of interfacial shear stress was high, the influence of interfacial creep damage on bond-slip curves should be considered, where higher interfacial shear stress and longer duration led to more significant creep damages. When the bonding length of CFRP was longer than the effective bonding length, the interfacial creep damage had no obvious effect on its ultimate bond strength. © 2020, Editorial Board of Journal of Harbin Institute of Technology. All right reserved.
引用
收藏
页码:167 / 175
页数:8
相关论文
共 17 条
  • [1] ZHENG Yun, YE Lieping, YUE Qingrui, Progress in research on steel structures strengthened with FRP, Industrial Construction, 35, 8, (2005)
  • [2] LI Chunliang, LI Kai, ZHANG Lihui, Et al., Interfacial bond behavior of CFRP reinforced steel structures with end anchorage, Journal of Harbin Institute of Technology, 48, 9, (2016)
  • [3] XIA S, TENG J., Behaviour of FRP-to-steel bonded joints, Proceedings of the International Symposium on Bond Behaviour of FRP in Structures (BBFS 2005), (2005)
  • [4] FAWZIA S, ZHAO X L, AL-MAHAIDI R., Bond-slip models for double strap joints strengthened by CFRP, Composite Structures, 92, 9, (2010)
  • [5] FERNANDO N D., Bond behaviour and debonding failures in CFRP-strengthened steel members, (2010)
  • [6] LI C, LU K, HE J, Et al., Effects of mechanical properties of adhesive and CFRP on the bond behavior in CFRP-strengthened steel structures, Composite Structures, 211, (2019)
  • [7] FERNANDO D, YU T, TENG J G., Behavior of CFRP laminates bonded to a steel substrate using a ductile adhesive, Journal of Composites for Construction, 18, 2, (2014)
  • [8] WANG H T, WU G, DAI Y T, Et al., Experimental study on bond behavior between CFRP plates and steel substrates using digital image correlation, Journal of Composites for Construction, 20, 6, (2016)
  • [9] HE Jun, Research on the effects of adhesive properties on the failure behaviours of CFRP-to-steel interface, (2017)
  • [10] XUE Yao, ZHANG Long, CAO Shuangyin, Et al., Experimental study on bonding behavior of CFRP-to-steel interface under early curing age, Journal of Southeast University (Natural Science Edition), 45, 2, (2015)