Service Life Prediction of Solid Motor during Vertical Storage Based on Accelerated Aging and Actual Loadings

被引：0
|
作者：
Wang X. [1 ]
Zhao R. [1 ]
Lu H. [2 ]
Liu L. [1 ]
Wu P. [1 ]
机构：
[1] Naval Aviation University, Yantai, 264001, Shandong
[2] Nanchang Hangkong University, Nanchang, 330063, Jiangxi
来源：
Binggong Xuebao/Acta Armamentarii | 2019年 / 40卷 / 11期
关键词：
Accelerated aging; Actual loading; Fatigue damage; Finite element analysis; Service life prediction; Vertical storage solid motor;
D O I：
10.3969/j.issn.1000-1093.2019.11.005
中图分类号：
学科分类号：
摘要：
The influences of accelerated aging and actual loadings are both considered in predicting the storage life of solid motor grain during vertical storage. The variation law of the extensibility of propellant was obtained by high temperature accelerated aging test. The variation of von Mises strain of grain dangerous point and the fatigue damage of grain under vibration were obtained by the finite element simulation of motor under two loadings of curing/static vertical storage/blast-off and curing/ dynamic vertical storage. Service life of motor was predicted according to the variation law of von Mises strain and extensibility with storage time. Test results show that the extensibility of propellant decreases with time; the creep effect appears in the grain under a long-term action of gravitational load, and the periodic stresses are generated at the points in the grain under actual loadings. The fatigue damage of grain storaged for half a year is 0.017 12. The storage time has a negative exponent relation with vertical storage frequency, and the allowable vertical storage is 15 times. Its storage life during vertical storage is between 8.24 and 11.75 years, and its storage life under horizontal storage is 17.81 years. © 2019, Editorial Board of Acta Armamentarii. All right reserved.
引用
收藏
页码：2212 / 2219
页数：7
相关论文
共 17 条
  • [1] Raouf N., Pourtakdoust S.H., Abadi B.A.A., Et al., Structural reliability analysis of solid rocket motor with ellipsoidal, Journal of Spacecraft and Rockets, 53, 2, pp. 389-392, (2016)
  • [2] Loyd D.K., Long range service life analysis (LRSLA) system trend analysis life estimating procedure, (1976)
  • [3] Zhang S.N., Meng T., Effect of performance improvement in guided missile weapon storage life prolonging indicated by Militiaman missile, Missiles and Space Vehicles, 1, pp. 58-61, (2012)
  • [4] Michael D.J., An investigation of composite propellant accelerated ageing mechanisms and kinetics, Propellants, Explosives, Pyrotechnics, 28, 3, pp. 114-119, (2003)
  • [5] Bilgin F., Sage T., Orbey N., Lifetime prediction of carboxyl-terminated polybutadiene(CTPB), Journal of Applied Polymer Science, 42, 1, pp. 153-158, (1991)
  • [6] Fu H.M., Yang L.B., Lin F.C., Et al., Integral method for storage life prediction of solid propellant, Journal of Mechanical Strength, 29, 5, pp. 754-759, (2007)
  • [7] Chen H.J., Teng K.N., Li B., Et al., A research of solid rocket motor grain storage life forecast based on modified Arrhenius method, Journal of Projectiles, Rockets, Missiles and Guidance, 31, 4, pp. 232-239, (2011)
  • [8] Zhang X.J., Chang X.L., Chen S.X., Et al., Hydrothermal aging testing and life assessment for adhesive interface of solid rocket motor, Journal of Solid Rocket Technology, 36, 1, pp. 27-31, (2013)
  • [9] Yuan D.C., Tang G.J., Li H.Y., Et al., Three-dimension viscoelastic analysis and accelerated aging approach to predict the service life of solid missile motor, Acta Armamentarii, 27, 4, pp. 685-689, (2006)
  • [10] Xie Z.B., Li H.W., Jia M.M., Et al., Study of life estimation method for solid rocket motor based on state monitoring and aging test, Equipment Environmental Engineering, 9, 4, pp. 15-18, (2012)
12