Design and adaptability study of miniature four-leg top coal caving hydraulic support

被引：0
|
作者：
Guo J. [1 ,2 ,3 ]
Guo X. [1 ,2 ]
Feng G. [1 ,2 ,4 ]
Guo Y. [1 ,2 ]
Wen X. [1 ,2 ]
Li L. [3 ]
Wang Z. [1 ,2 ]
Huang W. [1 ,2 ]
Kang L. [1 ,2 ]
机构：
[1] College of Mining Engineering, Taiyuan University of Technology, Taiyuan
[2] Key Laboratory of Shanxi Province for Mine Rock Strata Control and Disaster Prevention, Taiyuan
[3] Shanxi Coking Coal Group Co.,Ltd., Taiyuan
[4] Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering, Taiyuan
来源：
Meitan Xuebao/Journal of the China Coal Society | 2023年 / 48卷
关键词：
fully mechanized caving mining; hydraulic support; motion simulation; physical test; static stress analysis;
D O I：
10.13225/j.cnki.jccs.2022.1672
中图分类号：
学科分类号：
摘要：
The miniature hydraulic support and its measurement and control system play a vital role in the physical test. In order to better integrate the engineering practice and ensure the scientificity,accuracy and authenticity of the test results,the SOLIDWORKS software is used to carry out three-dimensional modeling,motion simulation and strength test of the miniature support. The components required for the hydraulic system are non-standardly designed and modified. Based on the RC model concept,a compete hydraulic,and measurement and control system is configured,and the mechanical properties of the support are tested accordingly. The results show that the miniature support can meet the requirements of controllable multivariable in the test by controlling the pressure of the pump station and cooperating with the hydraulic valve under the premise of similar structure and bearing characteristics. Taking the MNZF0.2/ 0.55/ 0.84 miniature hydraulic support and measurement and control system design as an example,this paper provides the specific steps of support structure design,the reasonable conversion formula of hydraulic system,and clarifies the design ideas and precautions of support. Support strength,stiffness stability,pump station pressure can reach more than 3 MPa,much higher than the test requirements. The motion curve of the front beam of the support conforms to the characteristics of the double lemniscate,and the range of motion trajectory is only about 0.46 mm,which is less than the theoretical optimal value. The support can well meet its bearing characteristics and motion requirements in the stages of initial support,resistance increasing,constant resistance and pressure relief. After testing,the working resistance of the support is about 168 N,the corresponding support strength is 0.54 MPa, and the system pressure still has a large margin. The side support jack adopts the same hydraulic system as the support legs, which can protect the coal wall. The support system composed of support jack and top beam can better reflect the coupling characteristics of the surrounding rock of the support. The research results can provide help for univariate or multivariate analysis of physical tests related to the coupling between support and surrounding rock. The test data of coupling with surrounding rock has important reference value for field application. © 2023 China Coal Society. All rights reserved.
引用
收藏
页码：766 / 777
页数：11
相关论文
共 21 条
  • [1] WANG Guofa, Study and practices on technical system of hydraulic powered supports, Journal of China Coal Society, 35, 11, pp. 1903-1908, (2010)
  • [2] HE Z, XIE H, GAO M, Et al., The fracturing models of hard roofs and spatiotemporal law of mining-induced stress in a top coal caving face with an extra-thick coal seam[J], Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 7, 1, pp. 1-15, (2021)
  • [3] pp. 110-116
  • [4] LI T, WANG J, ZHANG K, Et al., Mechanical analysis of the structure of longwall mining hydraulic support[J], Science Progress, 103, 3, pp. 1-21, (2020)
  • [5] ZHANG Y, XIAO L., Research on design and simulation of four-bar linkage mechanism of hydraulic support based on virtual prototype technology, 2nd International Conference on Civil Engineering.Architecture and Building Materials (CEABM 2012), pp. 3539-3542, (2012)
  • [6] ZHANG Kebin, QIAN Minggao, ZHENG Pengqiang, Et al., Relationship between support and surrounding rocks and determination of reasonable rated working resistance against support, Journal of Mining & Safety Engineering, 37, 2, pp. 215-223, (2020)
  • [7] CAO L M, SUN S J, ZHANG Y Z, Et al., The research on characteristics of hydraulic support advancing control system in coal mining face [J], Wireless Personal Communications, 102, 4, pp. 2667-2680, (2018)
  • [8] LIU H., Hydraulic support model test load equipment and its hydraulic control system[C], 2nd International Conference on Manufacturing Science and Engineering, pp. 4455-4458, (2011)
  • [9] MENG Lingyu, ZHOU Rulin, GUO Zijian, Design and research of hydraulic cylinder precise control test system, Coal Science and Technology, 51, 6, pp. 237-245, (2023)
  • [10] HU X, LIU X., Design and analysis of one-degree statically indeterminate hydraulic support[J], Journal of Mechanical Science and Technology, 35, 12, pp. 5529-5539, (2021)
123