Location method for principal section orientation of KDP or DKDP frequency-doubling crystal

被引：0
|
作者：
Gao B. [1 ]
Yin W.-H. [2 ]
Li Q. [1 ]
Jiang C.-L. [2 ]
Yang B. [2 ]
Chai L.-Q. [1 ]
机构：
[1] Research Center of Laser Fusion, Chinese Academy of Engineering Physics, Mianyang
[2] Xi'an Institute of Applied Optics, Xi'an
来源：
Guangxue Jingmi Gongcheng/Optics and Precision Engineering | 2019年 / 27卷 / 02期
关键词：
Frequency-doubling crystal; Jones matrix; Principal section; The least square fitting;
D O I：
10.3788/OPE.20192702.0295
中图分类号：
学科分类号：
摘要：
A frequency-doubling crystal is one of the most important light components in the inertial confinement fusion (ICF) facility. The principal section is closely related to the phase-matching angle and the absorption coefficient of the frequency-doubling crystal. To orient the principal section accurately, an indirect measurement method is presented based on light intensity. A measurement system was established using a laser, power stabilizer, half-plate, crystal, polarizer, and analyzer. The position of extinction, which was the principal section of the crystal, was obtained by rotating the polarizer and analyzer simultaneously. The Jones matrix model for the measurement system was deduced, and an expression formula for the relationship between light intensity, polarizer, and analyzer was derived. Through least squares curve fitting, the orientation of the principal section can be found. The validity of the model was verified using the simulation and experimental results. The test data show that the repeatability of orientation was better than 0.02°. The location accuracy of this method satisfies the requirements of KDP or DKDP frequency-doubling crystals in the ICF. © 2019, Science Press. All right reserved.
引用
收藏
页码：295 / 301
页数：6
相关论文
共 12 条
  • [1] Jia K., Yuan X.D., Xu X., Et al., Influence of clamping modes in KDP crystal on conversion efficiency of third harmonic generation, High Power Laser and Particle Beams, 23, 6, pp. 1553-1558, (2011)
  • [2] Zhang Y., Li T., Yuan X.D., Et al., Theoretical model of phase-matching angles for KDP crystals and its verification analysis, Acta Phys. Sin., 64, 2, (2015)
  • [3] Wang S.F., An C.H., Zhang F.H., Et al., Thermal field distribution in fly-cutting of KDP crystal and its influence on chip morphology, Opt. Precision Eng., 24, 8, pp. 1949-1950, (2016)
  • [4] Guo X.G., Liu Z.Y., Zheng G.L., Et al., Micro-mechanical behavior and machining property for tripler plane of KDP crystal, Opt. Precision Eng., 24, 2, pp. 398-405, (2016)
  • [5] Su R.F., Chen X.J., Zhu M.Z., Et al., Ascertainment of operating posture of KDP crystal supporting system, Opt. Precision Eng., 25, 3, pp. 632-639, (2017)
  • [6] Wu Y.S., Li Y., Chen W.P., Et al., Oblique incidence on uniaxial crystal with arbitrarily orienied optical axis: Jones matrix with non-orthougnal elements, Optronics Lasers, 6, 5, pp. 287-293, (1995)
  • [7] Shen W.M., Shao Z.X., Dispersion between ordinary ray and extraordinary ray in uniaxial crystals for any orientation of optical axis, Acta Optica Sinica, 22, 6, pp. 70-76, (2002)
  • [8] Gao B., Yang B., Li Q., Et al., Absorption coefficient measurement of KDP or DKDP frequency doubling crystal on oblique incidence, Opt. Precision Eng., 24, 12, pp. 3041-3047, (2016)
  • [9] Shen H., Zhang Y.C., Zhu R.H., Mathematical model and structure parameters optimization of KDP crystal optical absorption coefficient measurement with interferometry method based on photothermal displacement principle, Infrared and Laser Engineering, 42, 12, pp. 3354-3356, (2013)
  • [10] Wang Y.W., The analysis of huygens-diagraph in searching for the direction of light transmission in crystal, Journal of Hengyang Normal University(Natural Science), 24, 3, pp. 23-26, (2003)
12