Oxidation Behaviors of Four Candidate Materials for the Advanced Ultra-Supercritical Water Power Plant in Supercritical Water at 700℃

被引：0
|
作者：
Yang J. [1 ]
Wang S. [1 ]
Wang J. [2 ]
Xu D. [1 ]
机构：
[1] School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an
[2] School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an
来源：
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University | 2021年 / 55卷 / 02期
关键词：
Boiler; High temperature oxidation; Iron-based alloy; Nickel-based alloy; Supercritical water;
D O I：
10.7652/xjtuxb202102003
中图分类号：
学科分类号：
摘要：
Oxidation behaviors of four candidate materials for the advanced ultra-supercritical water power plant are studied in supercritical water at 700℃/25 MPa for 320 h. These four materials are Inconel 617, Inconel 740, HR6W and Sanicro 25. The 2-D and 3-D morphology, cross-sectional structure of the oxides formed on the alloys after exposure are observed, and the oxide phase are analyzed. The results are compared with those in other literature. Results show that the structure of the oxide films formed on HR6W and Sanicro 25 with high iron content forms a double layer structure with a Fe-rich outer layer and a Cr-rich inner layer after exposed in supercritical water at 700℃ for 320 h, while only one Cr-rich spinel structure layer is formed on Inconel 740 and Inconel 617 after exposed to supercritical water. The increase of ambient temperature and ambient pressure promotes the oxidation weight gain of the alloys in supercritical water. The reaction of supercritical water with Fe on the alloy surface to produce hydrogen has an inhibitory effect on the formation of continuous chromium oxide layer on the alloy surface. The order of the weight gain data and the oxide layer thickness of the four candidate materials is Sanicro 25>HR6W>Inconel 740>Inconel 617. © 2021, Editorial Office of Journal of Xi'an Jiaotong University. All right reserved.
引用
收藏
页码：18 / 26
页数：8
相关论文
共 31 条
  • [1] WRIGHT I G, DOOLEY R., A review of the oxidation behaviour of structural alloys in steam, International Materials Reviews, 55, pp. 129-167, (2010)
  • [2] CHI Chengyu, YU Hongyao, XIE Xishan, Critical high temperature materials for 700℃ AUSC power plants, World Iron & Steel, 13, pp. 42-59, (2013)
  • [3] SHI Xuan, New development of key materials for ultra-supercritical power generation boiler, Materials for Mechanical Engineering, 33, pp. 1-5, (2009)
  • [4] ZHANG Tao, HAO Liting, TIAN Feng, Et al., Research progress on high temperature materials for 700℃ ultra-supercritical coal-fired unit, Materials for Mechanical Engineering, 40, pp. 1-6, (2016)
  • [5] YANG Jianqiao, WANG Shuzhong, LI Yanhui, Et al., Novel design concept for a commercial-scale plant for supercritical water oxidation of industrial and sewage sludge, Journal of Environmental Management, 233, pp. 131-140, (2019)
  • [6] PEREZ-GONZALEZ F, GARZA-MONTES-DE O N, COLAS R., High temperature oxidation of the Haynes 282© nickel-based superalloy, Oxidation of Metals, 82, pp. 145-161, (2014)
  • [7] HOLCOMB G R., High pressure steam oxidation of alloys for advanced ultra-supercritical conditions, Oxidation of Metals, 82, pp. 271-295, (2014)
  • [8] REN Xiumin, LIANG Zhiyuan, Steam oxidation behavior of high temperature alloys for high efficiency ultra supercritical units, Nonferrous Metals Engineering, 9, pp. 1-8, (2019)
  • [9] WANG Changshuai, GUO Lili, TANG Liying, Et al., Oxidation behavior of GH984G alloy in steam at 700℃, Acta Metallurgica Sinica, 55, pp. 893-901, (2019)
  • [10] WEI Kang, ZHANG Maicang, XIE Xishan, Recrystallization mechanisms in hot working processes of a nickel-based alloy for ultra-supercritical power plant application, Acta Metallurgica Sinica, 53, pp. 1611-1619, (2017)
1234