Effect of Nano-Al2O3 and -TiO2 Modified Silicone Coatings on High Temperature Oxidation Resistance of 304 Stainless Steel

被引：0
|
作者：
Lu Y. [1 ,2 ]
Du Y. [1 ,2 ]
Wang C. [2 ]
Xin L. [1 ]
Zhu S. [1 ,3 ,4 ]
Wang F. [3 ,4 ]
机构：
[1] Shi-Changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang
[2] School of Materials Science and Engineering, University of Science and Technology of China, Shenyang
[3] School of Materials Science and Engineering, Northeastern University, Shenyang
[4] Shenyang National Laboratory for Materials Science, Shenyang
来源：
Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research | 2021年 / 35卷 / 06期
关键词：
304 stainless steel; High temperature oxidation; Material surface and interface; Nano filler; Silicone coating;
D O I：
10.11901/1005.3093.2020.258
中图分类号：
学科分类号：
摘要：
Two modified silicone paints were prepared by physical mixing method with nano-Al2O3 and -TiO2 as the main filler. The corresponding paints are sprayed on the surface of tinplate and 304 stainless steel and dried at room temperature to obtain two type of coated samples. The conventional mechanical properties of the two coatings were tested, and the effect of the coating on the oxidation resistance of 304 stainless steel in the air at 600℃ was studied. The results show that both coatings have good adhesion, flexibility and impact resistance. Both coatings can effectively slow down the oxidation of 304 stainless steel at 600℃. When the ratio of nano-Al2O3 to TiO2 is 4:1, the nano-modified organic silicon coating has a better protective effect on 304 stainless steel. © 2021, Editorial Office of Chinese Journal of Materials Research. All right reserved.
引用
收藏
页码：458 / 466
页数：8
相关论文
共 21 条
  • [1] Wang R G, Li E M., Research on W-800℃ silicone high-temperature resistant coating formulation, J. Coat. Appl, 41, 1, (2011)
  • [2] Zhang A X, Zhou Q, Chen L., Progress of silicone industry in China in 2014, Silicone Mater, 29, (2015)
  • [3] Mathivanan L, Radhakrishna S., Heat-resistant anti-corrosive paint from epoxy-silicone vehicles, Anti-Corros. Methods Mater, 44, (1997)
  • [4] Zhang W J, Chen J H., High-temperature resistant silicone coating and adhesive, Silicone Mater, 16, 3, (2002)
  • [5] Liu H Y, Zhang S., Preparation and properties of black organic silicone coating with high-temperature resistance, Corros. Prot, 31, (2010)
  • [6] Yu L Y, Li X Y, Luo H., Effect of pigments and fillers on high temperature resistance and anticorrosion of silicone bonding coat modified by epoxy resin, China Adhes, 19, 4, (2010)
  • [7] Sun J T, Huang Y D, Cao H L, Et al., Synthesis of heat-resistant silicone resin and studies on its thermal and curing properties, J. Aeronaut. Mater, 25, 1, (2005)
  • [8] Luo F, Yan X H, Huang L J, Et al., Influence of talcum powder on the performance of epoxy modified organosilicane heat-resistant coatings, Fine Chem, 26, (2009)
  • [9] Lian W Z, Zhang G L, Ma C F, Et al., Preparation and properties of anti-corrosive coating with high temperature resistance and thermal insulation, Polym. Mater. Sci. Eng, 33, 6, (2017)
  • [10] Du Y, Wang C, Zhu S L, Et al., High temperature oxidation and electrochemical corrosion behavior of Al nano-particle modified silicone coating on 304 stainless steel, Chin. J. Mater. Res, 33, (2019)
123