OPTICAL FIBER SENSING AND THICKNESS DISTRIBUTION ESTIMATION OF ICING STATE ON WIND TURBINE BLADES

被引：0
|
作者：
Li W. [1 ]
Wen F. [2 ]
Chen G. [2 ]
Shu Y. [2 ]
Wang Z. [2 ]
Zhou Z. [3 ]
机构：
[1] College of Artificial Intelligence and Electrical Engineering, Guizhou Institute of Technology, Guiyang
[2] Datang Guizhou New Energy Development Co.，Ltd., Guiyang
[3] College of Architecture & Environment, Sichuan University, Chengdu
来源：
Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2023年 / 44卷 / 03期
关键词：
anti-icing and deicing; blades; ice detectors; thickness measuring; wind turbines;
D O I：
10.19912/j.0254-0096.tynxb.2021-1208
中图分类号：
学科分类号：
摘要：
This paper proposes the detection principle of optical fiber sensing ice thickness on wind turbine blades surface and designs a four-channel ice detector with double windows. The distribution of droplet collection rate under different attack angles and droplet sizes is calculated and analyzed by using simulation software platform. The ice detector on the top of its nacelle and three wind turbine blades approximately have the same airflow field to realize the ice thickness measuring and its distribution estimation of three wind turbine blades. The real icing experiment and thickness measuring demonstrated on a wind turbine. The results show that the ice thickness at the leading edge of the blade is maximal and increases gradually along the tip direction. and the difference between the ice detected values and the actual values is within 8%，which can satisfy the application requirements of the ant icing and deicing engineering application on wind turbine blades. © 2023 Science Press. All rights reserved.
引用
收藏
页码：77 / 83
页数：6
相关论文
共 16 条
  • [1] ZHENG J N., The development and development trend of wind power generation［J］, Electric power system equipment, 7, pp. 102-103, (2018)
  • [2] YANG Z H，, XIANG Z., Prediction model of blower blade icing failure and its realization method［J］, Journal of Shanghai Dianji University, 21, 4, pp. 7-13, (2018)
  • [3] YU H M, YU L F，, YOU H P，, Et al., Research and development on anti-icing and de-icing technology of wind turbine blade［J］, Materials review, 30, S1, pp. 220-222, (2016)
  • [4] HE Y L, LI J, DONG M H, Et al., Research on the effect of wind turbine performance under icing conditions［J］, Acta energiae solaris sinica, 33, 9, pp. 1490-1496, (2012)
  • [5] DONG Q T, JIN Z Y，, YANG Z G., A review of icing effect on horizontal axis wind turbine［J］, Machinery design & manufacture, 10, pp. 269-272, (2014)
  • [6] WANG W, GUAN X Y, Et al., Research and development on de-icing technology of wind turbine blade ［J］, Fiber reinforced plastics/composites, 1, pp. 90-93, (2014)
  • [7] HUANG Z J，, HU Z G，, ZHANG X L，, Et al., Research on wind turbine blade antiice coating technology［J］, North China electric power, 6, pp. 16-19, (2014)
  • [8] XU B, GUO X Y, CHEN H B., Active icing monitoring for wind turbine blade models with PZT technology［J］, Piezoelectrics and acoustooptics, 39, 1, pp. 72-76, (2017)
  • [9] YIN S S, YE L, CHEN B, Et al., Fiber optical icing sensor for detecting the icing type［J］, Instrument technique and sensor, 5, pp. 79-81, (2012)
  • [10] LIU Z J，, YE L，, CHEN B, Et al., Realization of lock- in detect circuit on weak signal detection of fiber-optical icing sensor ［J］, Instrument technique and sensor, 3, pp. 79-81, (2012)
12