Experiment of identifying semi-active particle damping loss factor based on steady-state energy flow method

被引：0
|
作者：
Xue C. [1 ]
Xu X. [1 ]
Su Z. [1 ]
Zhu X. [1 ]
Zuo M. [1 ]
Xia Z. [1 ]
Liu X. [2 ]
机构：
[1] School of Energy and Power, Jiangsu University of Science and Technology, Zhenjiang, 212003, Jiangsu
[2] School of Transportation Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing
来源：
Hangkong Dongli Xuebao/Journal of Aerospace Power | 2020年 / 35卷 / 01期
关键词：
Damping characteristics; Internal and external features; Loss factor; Semi-active particle damping; Steady-state energy flow method;
D O I：
10.13224/j.cnki.jasp.2020.01.007
中图分类号：
学科分类号：
摘要：
The relationship between semi-active particle damping loss factor and response signal was derived by steady-state energy flow method, and semi-active particle damping loss factor was identified through experimental method. The internal and external features affecting semi-active particle damping loss factor were explored by changing particle filling rate and voltage. The experimental results showed that the semi-active particle damping loss factor can increase by increasing the voltage, and gradually become stable after reaching a certain voltage; in addition, the semi-active particle damping loss factor could increase through increasing particle filling rate. After reaching 70% particle filling rate, the loss factor increased slowly and became stable gradually. © 2020, Editorial Department of Journal of Aerospace Power. All right reserved.
引用
收藏
页码：60 / 65
页数：5
相关论文
共 20 条
  • [1] Duan Y., Chen Q., Lin S., Experiments of vibration reduction effect of particle damping on helicopter rotor blade, Acta Aeronautica et Astronautica Sinica, 30, 11, pp. 2113-2118, (2009)
  • [2] Zhao Y., Xu F., Li Y., Et al., A method of preventing SPH numerical fracture for irregular particle models, Acta Aeronautica et Astronautica Sinica, 30, 11, pp. 2100-2105, (2009)
  • [3] Tang W., Wang Y., Wang X., Et al., Numerical study of particle damping in two dimensions by use of discrete element method, Journal of Aerospace Power, 26, 5, pp. 1159-1165, (2011)
  • [4] Liu B., Wang Y., Tian A., Et al., Design methodology for particle dampers applied to a wheel structure, Journal of Aerospace Power, 29, 10, pp. 2476-2485, (2014)
  • [5] Xia Z., Shan Y., Liu X., Experimental research on particle damping of cantilever beam, Journal of Aerospace Power, 22, 10, pp. 1737-1741, (2007)
  • [6] Kim J.H., Lee C.W., Semi-active damping control of suspension systems for specified operational response mode, Journal of Sound and Vibration, 260, 2, pp. 307-328, (2003)
  • [7] Hartl J., Ooi J.Y., Numerical investigation of particle shape and particle friction on limiting bulk friction in direct shear tests and comparison with experiments, Powder Technology, 212, 1, pp. 231-239, (2011)
  • [8] Lei X., Wu C., Non-obstructive particle damping using principles of gas-solid flows, Journal of Mechanical Science and Technology, 31, 3, pp. 1057-1065, (2017)
  • [9] Xiao W., Huang Y., Li W., Et al., Influence of particle damper configurations on the dynamic characteristic for gear transmission system, Journal of Mechanical Engineering, 53, 7, pp. 1-12, (2017)
  • [10] Tang W., Wang Y., Wang Z., Et al., Experimental study of particle damping for a two-dimensional vibrating structure, Journal of Aerospace Power, 26, 3, pp. 628-634, (2011)
12