High-temperature erosion behavior of Al2O3 reinforced Inconel625 high velocity oxy-fuel sprayed and direct-aged composite coatings

In this study, Inconel625+30%Al2O3 (IN30AL) blended powders were sprayed on a commercially used boiler steel ASTM SA210 GrA1 using high-velocity oxy-fuel approach (HVOF). The microstructure, mechanical properties and elevated temperature erosion behavior of post-processed coatings and as-sprayed IN30ALcoatings were investigated. The elevated temperature erosion studies on IN30AL coatings both as-sprayed and post-processed were investigated at 900 degrees C temperature at two impact angles 30 degrees and 90 degrees using standard high temperature erosion test rig. Phase composition, interface of substrate/coating, and morphologies of eroded coatings were examined using x-ray diffraction, x-ray maps, scanning electron microscope, & energy dispersive spectrometer techniques. Compared with the as-sprayed IN30AL coatings, the heat-treated coatings have refined microstructure, better mechanical properties which improve the elevated temperature erosion resistance of IN30ALcoatings.