Method for evaluating healing state of self-healing ceramics using acoustic emission

Previous studies have evaluated the volume expansion rate of oxidation products and healing temperature and time. However, the bonding strength between the product and the matrix is yet to be appropriately evaluated. To develop a self-healing agent selection method for ceramics, this study proposed a method for examining the healing state and fracture behavior of self-healing ceramics through acoustic emissions (AE) generated during three-point bending tests. This study fabricated completely and incompletely healed SiC30 vol%/Al2O3 composite specimens by adjusting the healing time, and the crack length was assessed employing linear fracture mechanics, and effect of healing state on cumulative AE energy and AE frequency. The crack lengths were compared with those of the kinetic model of crack healing. The crack lengths of the 5-h healed specimens were estimated by linear fracture mechanics to be 12.5 mu m for incomplete and 10.4 mu m for complete healing, while that estimated by the kinetic model were 13.5 mu m, indicating the usefulness of the kinetic model in the initial stages of crack healing. Furthermore, while the AE frequency at the initial stage of fracture was dominated by peaks below 100 kHz in damaged or incompletely healed specimen, there was a relatively high frequency peak of over 200 kHz in smooth and completely healed specimen, The average cumulative AE energies of smooth, damaged, 5 h-healed (incompletely), 5 h-healed (completely), and 24 h-healed specimens were 395, 0.89, 26.8, 189, and 318 V<middle dot>mu s, respectively. Thus, the AE energy that accumulated until rupture tended to increase as healing progressed, these findings suggest that the AE method can be used to determine healing conditions. These results will help establish a method for selecting self-healing agents according to the environment in which they are used.