Study on the Effect of Starved Lubrication on the Dynamic Characteristics of Locally Failed Roller Bearings

被引:0
|
作者
Huo, Zhongtang [1 ]
Chen, Jianqi [1 ]
Hao, Lingjuan [1 ]
Gao, Jiansong [1 ]
机构
[1] Handan Univ, Mech & Elect Coll, Handan, Peoples R China
关键词
Starved lubrication; roller bearing; localized failure; frequency deviation; fault diagnosis; BALL-BEARINGS;
D O I
10.1080/10402004.2024.2389980
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
When the lubricant is not enough to maintain the ideal lubrication state of the bearing, the deep groove ball bearing will enter the starved lubrication state, which leads to the change of the vibration response of the deep groove ball bearing with localized defects. Previous bearing dynamics models mainly consider the lubrication state as an ideal lubrication condition, which may not reveal the effect of starved lubrication on the vibration characteristics of defective bearings. In this paper, the internal interaction of the system under starved condition is taken into account, and a dynamic model of defective deep groove ball bearings with insufficient lubricant is established to investigate the effects of different starved lubrication degrees on the contact force, friction force, cage speed, and system vibration characteristics. The results show that the lubricant insufficiency significantly changes the contact force inside the bearing, and the increase in friction caused by the increase in the degree of starved lubrication leads to the suppression of the degree of bearing slipping. The root mean square (RMS) value of the time-domain signal and the outer ring fault frequency both increase with the increase of the starved degree. The results of the study are helpful for fault diagnosis and condition monitoring of related equipment.
引用
收藏
页码:952 / 961
页数:10
相关论文
共 50 条
  • [1] Effect of compound pit textures on the friction and wear of thrust cylindrical roller bearings under starved lubrication
    Wang, Yueyong
    Zhang, Yimin
    Long, Risheng
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2023, 75 (03) : 343 - 351
  • [2] Lubrication and loading characteristics of cylindrical roller bearings with misalignment and roller modifications
    Qiu, Liangwei
    Liu, Shuangbiao
    Chen, Xiaoyang
    Wang, Zhijian
    TRIBOLOGY INTERNATIONAL, 2022, 165
  • [3] EFFECT OF UNEQUAL LOAD ON LUBRICATION OF ROLLER BEARINGS
    GOTTNER, GH
    BARTZ, W
    HOSL, W
    MAGYAR KEMIKUSOK LAPJA, 1968, 23 (06): : 307 - &
  • [4] Influence of dimple textures on the tribological performances of tapered roller bearings under starved lubrication
    Wang, Yueyong
    Zhang, Yimin
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2023, 75 (01) : 42 - 50
  • [5] LUBRICATION EFFECT ON NOISE IN CYLINDRICAL ROLLER-BEARINGS
    KOBAYASHI, M
    KURITA, M
    JOURNAL OF JAPAN SOCIETY OF LUBRICATION ENGINEERS, 1972, 17 (09): : 554 - 560
  • [6] EFFECT OF LUBRICATION ON LIFETIME FRICTION AND WEAR ON ROLLER BEARINGS
    MUNNICH, H
    ERDOL UND KOHLE ERDGAS PETROCHEMIE, 1968, 21 (08): : 486 - &
  • [7] Starved elastohydrodynamic lubrication of the rib-roller end contact in tapered roller bearings: Film thickness, traction and moments
    Colin, F
    Chevalier, F
    Chaomleffel, JP
    de Mul, J
    Dalmaz, G
    TRIBOLOGY FOR ENERGY CONSERVATION, 1998, 34 : 253 - 263
  • [8] A study on the effect of acceleration on slip velocity and lubrication performance in cylindrical roller bearings
    Cao, Wei
    Wang, Jiaxu
    Pu, Wei
    Zhang, Ying
    Wu, Jiqiang
    Chu, Kunming
    Wu, Huichao
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2016, 230 (10) : 1231 - 1243
  • [9] Wear Study of Roller Bearings with Minimal Lubrication.
    Jeske, M.
    Tribologie und Schmierungstechnik, 1987, 34 (05): : 284 - 288
  • [10] Influence of groove dimensions on the tribological behavior of textured cylindrical roller thrust bearings under starved lubrication
    Long, Risheng
    Zhao, Chao
    Jin, Zhihao
    Zhang, Yimin
    Pan, Zhen
    Sun, Shaoni
    Gao, Weihua
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2021, 73 (06) : 971 - 979