Acoustic wave propagation in depth-evolving sound-speed field using the lattice Boltzmann method

This study investigates the propagation of sound waves within deep-sea low-sound-speed channels using the lattice Boltzmann method, with a key focus on the influence of depth-dependent sound speed on wave propagation. The depth-variable sound speed condition is realized through the incorporation of an external force proportional to the density gradient. After the model verification, investigations into the two-dimensional spreading of sound sources reveal that the depth-dependent sound speed curves the wave propagation. When source depths differing from the low-sound-speed channel, wave paths deviate due to contrasting speeds above and below. When the sound source is situated within the low-sound-speed channel, waves exhibit converging patterns. The simulations also detail the total reflection behavior of sound waves. When the incident angle falls exceeds the critical angle, the waves remain intact within the low-sound-speed channel, thereby enabling the preservation of high amplitude acoustic signals even at remote locations. The subsequent simulations of sound wave propagation around obstacles demonstrate that the low-sound-speed channel also exhibits better signal transmission capabilities in the presence of obstacles. In a uniform sound speed environment, acoustic wave propagation around a submarine exhibits a symmetric pattern. By contrast, under depth-evolving speed conditions, submarines operating at various depths manifest distinct propagation characteristics, such as asymmetric wave propagation during shallow diving, as well as wave attenuation or even silencing when cruising within low-sound-speed channels. These findings underscore the profound implications of depth-evolving sound speed on underwater acoustic signal detection and transmission.