Non-isothermal electroosmotic flow of a viscoelastic fluid through a porous medium in a microchannel

The influence of the temperature-dependent viscosity on the electroosmotic flow through a porous medium in a microchannel of parallel flat plates. At the end, an imposed electric field induces Joule heating and temperature gradients, modifying the viscosity of the fluid. The Phan-Thien-Tanner and Darcy-Forchheimer models describe the viscoelastic fluid through the porous media. Consequently, the electric double layer (EDL) overlaps at the center plane of the microchannel, causing an electrically charged porous matrix and modifying the zeta potential along the microchannel walls. Therefore, we define a zeta potential ratio of the porous matrix and that at the microchannel walls. Unlike similar investigations, the boundary condition for the zeta potential varies locally due to the temperature field, modifying the interaction among hydrodynamics, electrical, viscoelastic, thermal and porosity effects. A modified P & eacute;clet number is defined as a function of the porosity and thermal conductivity of the fluid and an effective charge density is determined based on the Poisson-Boltzmann equation, accounting for the pore size and the zeta potential ratio. The set of equations are solved numerically considering the lubrication approximation theory. We found that the influence of the temperature-dependent viscosity increases the shear stresses at the EDL region, particularly where the temperature rises to maximum values. Also, the overlapping of the EDL occurs mainly for low values of permeability. Finally, the pressure gradient involved in the Darcy law can be altered through the zeta potential ratio.