Synchronous planning of initial and target positions of redundant space manipulator based on deterministic configuration tree

Planning the operating position of redundant space manipulators (RSMs) can effectively improve the performance of manipulators while improving the quality of on-orbit servicing (OOS) is of great significance. For RSM, OOS with synchronous planning of initial and target positions (ITPs) has many combinations of positions or configurations, making it difficult to apply existing methods directly. To address this problem, this study proposes a method for synchronous planning ITPs of RSMs based on a deterministic configuration tree (DCT). First, the planning area is divided into grids, with the global performance analyzed utilizing self-motion manifolds. Then, a DCT is constructed based on the analysis results of global performance. Finally, a position planning strategy of pre-planning, rewiring, and regrowth is proposed to achieve synchronized planning of the ITP of the RSM on the DCT. This method is conducted alternately in operational space and joint space. The gridding and regrowth process in operational space avoids the considerable calculation required by gridding in highdimensional joint space and improves the efficiency of position planning. In joint space pre-planning and rewiring, the ITP is optimized with the constraint of motion planning results while position planning is realized. The simulation experiment results of the 3-degree-of-freedom (DOF) planar RSM, 4-DOF RSM, and 7-DOF RSM indicate that the proposed method reduces time consumption by 34.81%, 18.15%, and 16.26% compared to conventional methods. Furthermore, energy consumption is reduced by 30.68%, 16.93%, and 15.64%, respectively. A typical ITPs synchronous planning task is also simulated, and the results also show that this planning method can effectively optimize the ITPs and reduce energy consumption.