Passivity-based control of underactuated mechanical systems with Coulomb friction: Application to earthquake prevention

Passivity property gives a sense of energy balance. The classical definitions and theorems of passivity in dynamical systems require time invariance and locally Lipschitz functions. However, these conditions are not met in many systems. Characteristic examples are nonautonomous and discontinuous systems due to the presence of Coulomb friction. This paper presents an extended result for the negative feedback connection of two passive nonautonomous systems with set-valued right-hand side based on an invariance-like principle. Such extension is the base of a structural passivity-based control synthesis for underactuated mechanical systems with Coulomb friction. The first step consists of designing the control able to restore the passivity in the considered friction law, achieving stabilization of the system trajectories to a domain with zero velocities. Then, an integral action is included to improve the latter result and perform a tracking over a constant reference (regulation). Finally, the control is designed considering dynamics in the actuation. These control objectives are obtained using fewer control inputs than degrees of freedom, as a result of the underactuated nature of the plant. The presented control strategy is implemented in an earthquake prevention scenario, where a mature seismogenic fault represents the considered frictional underactuated mechanical system. Simulations are performed to show how the seismic energy can be slowly dissipated by tracking a slow reference, thanks to fluid injection far from the fault, accounting also for the slow dynamics of the fluid's diffusion. (c) 2024 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).