Effective polysulfide control in lithium-sulfur batteries utilizing BiFeO3 nanoparticles

Lithium-sulfur batteries (LiSBs) offer high energy density, cost-effectiveness, and eco-friendliness, making them promising for future energy storage. This study explores using BiFeO3 (BFO) nanoparticles (NPs) to tackle challenges such as lithium polysulfides (LiPs) and shuttle issues in LiSBs. It employs a solid-state melt diffusion technique, encapsulates sulfur in single-walled carbon nanotubes (SCNTs), and utilizes BFO for effective polysulfide control. Herein, composite cathodes of sulfur (S)/SCNTs (abbr. SCNT) were fabricated, and cells were designed using a BFO-coated separator (SCNT-BFS). In addition, a cathode modification was performed with composite S/SCNTs/BFO (SCNT-BF), and a comparative analysis was conducted to assess the effectiveness of the BFO in the separator and the cathode. Cyclic voltammetry measurements revealed that the increased current peak intensity at lower reduction potential in SCNT-BF and SCNT-BFS indicated control of higher-order LiPs (Li2Sx, where 4 <= x <= 8), resulting in the generation of more stable lower-order products (Li2S2/Li2S). The charge/discharge analysis revealed controlled LiPs, resulting in high-capacity retention in SCNT-BF (similar to 75%) and SCNT-BFS (similar to 88%) over 200 cycles, which yielded capacities of 526 and 700 mAh/g at C/8 (1C = 1675 mA/g). These promising results suggest that incorporating BFO into the cathode and separator can advance the commercialization of durable LiSBs.