Research on detection of switch rail defects based on pulse reflection method of the dominant mode

Guided wave structural health monitoring offers a promising way for continuous surveillance and identification of structural damage. However, due to the variable cross-section properties of the switch rail in the longitudinal direction, there are different modes present on different crosssections, so the guided wave signals excited are very complex. The traditional baseline subtraction method can be used to extract defect echo features, but it is prone to false positives due to the influence of external factors such as field temperature change and environmental noise. This paper proposes a switch rail defect detection method based on the pulse reflection method of the dominant mode. Initially, eight typical cross-sections are chosen based on the cross-sectional dimensions of the switch rail. Semi-analytical finite element(SAFE) method is utilized to solve the dispersion curves and wave structure matrix of guided waves in the switch rail. According to the 3 sigma rule, the dominant mode whose node amplitude is much higher than other modes is selected, and the excitation signal is applied at the maximum value of the mode, which successfully excites the dominant mode. Through simulation and experimental validation, the reflected waves of the dominant mode at the defect are observable and visible, and the pulse reflection method can be used to detect the defects at the switch rail foot with a positioning error of less than 10 cm. The pulse reflection method of the dominant mode proposed in this paper, which has high detection efficiency and is not affected by the ambient temperature, provides a new idea and way to detect defects of the switch rail based on the ultrasonic guided wave method.