A unique case report of a revision extensor mechanism reconstruction using Marlex mesh in the setting of proximal tibial bone deficiency: The tantalum clamshell technique

Extensor mechanism (EM) disruption is a rare but severe complication of total knee arthroplasty (TKA) that can greatly impair function. Treatment options for chronic patella tendon ruptures include primary repair, autograft augmentation, and reconstruction with allograft or synthetic material. Despite various techniques, failures can occur, and options for reconstruction after a failed allograft or mesh are limited, especially if the tibial component is well -fixed and cannot be easily removed, and if there is proximal tibial deficiency from a previous failed EM allograft. This case report presents a novel solution for revision EM reconstruction in a 72y.o. female patient with a history of multiple EM failures using an off -label Trabecular Metal Cone -Mesh -Cone (TM CMC) clamshell construct. The surgical procedure involved the removal of a non -viable allograft from the knee joint and the creation of a custom trabecular metal (TM) clamshell construct with a Marlex mesh graft in between the two TM implants. The customized TM cone was designed to cover the deficient anterior tibia and wrap around the ingrown TM cone. The Marlex mesh was cemented between the existing implant and the customized TM cone, and the construct was secured in place with two cancellous screws. The mesh was tunneled between soft tissue to prevent contact with the implant and rotated scar tissue was interposed to prevent abrasion of the mesh on the implant surfaces. The patient tolerated the procedure well and no complications were noted postoperatively. At a follow-up 12 months after the operation the patient remains satisfied with the result. (c) 2024 Elsevier B.V. All rights reserved.