Composites based on mechanosynthesized G-phases Ti6Co16Si7 and Ti6Ni16Si7: phase composition and properties

被引：0
|
作者：
Eryomina, M. A. [1 ]
Lomayeva, S. F. [1 ]
Paranin, S. N. [2 ]
V. Zayats, S. [2 ]
机构：
[1] Russian Acad Sci, Udmurt Fed Res Ctr, Ural Branch, Izhevsk 426067, Russia
[2] Russian Acad Sci, Inst Electrophys, Ural Branch, Ekaterinburg 620016, Russia
来源：
LETTERS ON MATERIALS | 2023年 / 14卷 / 01期
关键词：
G; -phases; mechanical alloying; magnetic pulse compaction; hardness; wear resistance; DUPLEX STAINLESS-STEEL; DEGREES-C; PRECIPITATION; ALLOYS;
D O I：
10.48612/letters/2024-1-27-32
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Mechanical alloying of elemental powders in Ti -M -Si (M = Co, Ni) systems and subsequent thermal treatment were applied to synthesize new Ti 6 Co 16 Si 7 - and Ti 6 Ni 16 Si 7 - based composites (approximate to 90 vol.%). These phases are formed above 545 degrees C and 459 degrees C for cobalt- and nickel -containing systems, respectively, and belong to a family of G -phases. Mechanically alloyed powders were then prepared as bulk composites via magnetic pulse compaction. As -compacted composites were thoroughly characterized, including density, hardness, wear resistance, and electrical resistance.
引用
收藏
页码：27 / 32
页数：6
相关论文
共 50 条
  • [1] Growth and evolution of Ni-Ti-Si type G phase Ni16Ti6Si7 in Cu alloys
    Zhang, Xiao
    Liu, Qing
    Zhao, Desheng
    Liu, Yuhang
    Hua, Shuaiqi
    Ding, Haimin
    MATERIALS CHARACTERIZATION, 2024, 216
  • [2] Crystal structure and physical properties of Mg6Cu16Si7-type M6Ni16Si7, for M = Mg, Sc, Ti, Nb, and Ta
    Holman, K. L.
    Morosan, E.
    Casey, P. A.
    Li, Lu
    Ong, N. P.
    Klimczuk, T.
    Felser, C.
    Cava, R. J.
    MATERIALS RESEARCH BULLETIN, 2008, 43 (01) : 9 - 15
  • [3] MAGNETIC-PROPERTIES OF MN6NI16SI7 AND MN3CR3NI16SI7
    KOLENDA, M
    SZYTULA, A
    LECIEJEWICZ, J
    MALETKA, C
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 1991, 96 (1-3) : 121 - 124
  • [4] Chemical route to prepare nickel supported on intermetallic Ti6Si7Ni16 nanoparticles catalyzing CO methanation
    Kobayashi, Yasukazu
    Tada, Shohei
    Mizoguchi, Hiroshi
    NANOSCALE, 2021, 13 (39) : 16533 - 16542
  • [5] Magnetic and Structural Studies of G-Phase Compound Mn6Ni16Si7
    Ahmed, Sheikh Jamil
    Greedan, John E.
    Boyer, Chad
    Niewczas, Marek
    INORGANIC CHEMISTRY, 2018, 57 (22) : 14144 - 14151
  • [6] 激光熔覆Ni16Ti6Si7涂层组织与耐磨性
    盛伟
    刘栋
    王华明
    宇航材料工艺, 2007, (06) : 113 - 115
  • [7] Orientation relationships and interfaces between NiAl and G-phase Ni16Hf6Si7
    Chen, YX
    Yu, R
    Li, DX
    MATERIALS LETTERS, 2001, 49 (01) : 25 - 28
  • [8] TEM STUDY ON LASER PROCESSED INTERMETALLIC PHASES - AL16TI6(FE OR NI)7
    MA, Y
    GJONNES, J
    JOURNAL OF MATERIALS RESEARCH, 1993, 8 (03) : 421 - 429
  • [9] MG6NI16AS7 - A NEW G-PHASE
    KEIMES, V
    MEWIS, A
    ZEITSCHRIFT FUR NATURFORSCHUNG SECTION B-A JOURNAL OF CHEMICAL SCIENCES, 1995, 50 (08): : 1275 - 1276
  • [10] Fe16Nb6Si7 and Fe16Ta6Si7:: New D8a phases synthesized by the crystallization of mechanically alloyed amorphous powders
    Rixecker, G
    Haberkorn, R
    JOURNAL OF ALLOYS AND COMPOUNDS, 2001, 316 (1-2) : 203 - 208
12345