Dynamic behaviors of unreinforced and spray polyurea retrofitted brick masonry infill walls under blast loads: Shock tube test and analyses

Unreinforced masonry infill walls (MIWs) are prone to crack, fragment, and even collapse under blast loads, threatening the safety of building structures, as well as the inside occupants and equipment. Spray polyurea (SPUA) has been proven to be an excellent retrofitted material for MIWs to improve their blast resistance. Aiming to study the dynamic behaviors of brick MIWs under far-field range blast loads, the successive blast tests on seven unreinforced and SPUA-retrofitted brick MIWs with different thicknesses and boundary constraints were first carried out based on the developed compressed air-driven large cross-section (3mx3 m) shock tube. It was indicated that the blast resistance of MIWs significantly improved by increasing wall thickness and strengthening boundary constraint; SPUA coating can improve the blast resistance of MIWs and effectively suppress the debris generation and splash. Then, the equivalent single degree of freedom model based theoretical calculation and the simplified micro-model based numerical simulation methods previously established by authors were briefly introduced. Additionally, the dynamic behaviors of seven examined MIWs were further predicted and compared with test results, which verified the applicability of theoretical calculation and numerical simulation methods. Finally, the improved damage and failure evaluation criteria of unreinforced and SPUA-retrofitted MIWs were given, and the charge weight and standoff distance diagrams of typical MIWs were proposed based on the validated theoretical and numerical methods as well as the improved criteria, which would provide a helpful reference for blast-resistant evaluation and retrofitted design of brick MIWs.