Biocompatibility, thermal and mechanical properties of glass fiber-reinforced polybenzoxazine composites as a potential new endodontic post

被引:2
|
作者
Mora, Phattarin [1 ]
Rimdusit, Sarawut [2 ]
Karagiannidis, Panagiotis [3 ]
Srisorrchart, Ukrit [4 ]
Jubsilp, Chanchira [1 ]
机构
[1] Srinakharinwirot Univ, Fac Engn, Dept Chem Engn, Bangkok 26120, Nakhonnayok, Thailand
[2] Chulalongkorn Univ, Fac Engn, Ctr Excellence Polymer Mat Med Practice Devices, Dept Chem Engn, Bangkok, Thailand
[3] Univ Sunderland, Fac Technol, Sch Engn, Sunderland, England
[4] Inst Dent, Dept Med Serv, Nonthaburi, Thailand
关键词
biocompatible material; composite dental post; innovation; polybenzoxazine composite; thermoset polymer; FINITE-ELEMENT-ANALYSIS; STRESS-DISTRIBUTION; RESIN; RESTORATIONS; PERFORMANCE; ROOTS; TEETH;
D O I
10.1002/pc.28900
中图分类号
TB33 [复合材料];
学科分类号
摘要
A novel dental fiber post from glass fiber-reinforced polybenzoxazine (PBZ) composites was developed in this work. The essential properties, that is, chemical characteristics, thermal and biological properties of the PBZ composites were investigated for various glass fiber loadings (10.5, 23.7, 41.2 and 65.1 vol%). Finite element analysis (FEA) was also utilized to observe mechanical behaviors of the tooth model repaired with PBZ composite posts compared to a natural tooth model. The findings reveal that for the fiber-reinforced PBZ composites not only their thermal properties were significantly improved, but they also showed enhanced cytocompatibility; we found a coefficient of thermal expansion of 12.8 ppm/degrees C and cell viability of 91.55 for the 65.1 vol% glass fiber-reinforced PBZ composite. Moreover, samples reinforced with higher glass fiber loadings effectively resulted in the reduction of stress distribution in dentin observed from FEA suggesting protection againt root fractures. Restoration using the PBZ composite post showed the same stress patterns in the dentin-composite resin-post interface of the repaired tooth as in the natural tooth model. The results revealed that the glass fiber-reinforced PBZ composites possess good thermal properties and mechanical behaviors which renders them suitable candidates for biocompatible dental materials.Highlights The glass fiber/polybenzoxazine (GF/PBZ) composites had nontoxic properties as evidenced through cell viability, growth and morphology studies. The thermal expansion of the GF/PBZ composite was similar to that of dentin, promoting adaptation at the dentin-post interface. Mechanical behaviors evaluated by FEA of tooth model restored with GF/PBZ composite post were similar to those restored with commercial glass fiber post. The biocompatible GF/PBZ composite with good thermal and mechanical properties is a promising new candidate material as dental fiber post. Effect of glass fiber reinforcement on biological and thermal properties, mechanical behaviors and chemical characteristics of the PBZ composites for use as a dental fiber post. image
引用
收藏
页码:16205 / 16217
页数:13
相关论文
共 50 条
  • [1] Mechanical properties of glass fiber-reinforced endodontic posts
    Cheleux, Nicolas
    Sharrock, Patrick J.
    ACTA BIOMATERIALIA, 2009, 5 (08) : 3224 - 3230
  • [2] Glass fiber reinforced polybenzoxazine composites: Mechanical and adhesion properties
    Ishida, H
    Low, HY
    ANTEC '96: PLASTICS - RACING INTO THE FUTURE, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPACIAL AREAS, 1996, 42 : 3094 - 3097
  • [3] Mechanical properties of woven glass fiber-reinforced composites
    Kanie, Takahito
    Arikawa, Hiroyuki
    Fujii, Koichi
    Ban, Seiji
    DENTAL MATERIALS JOURNAL, 2006, 25 (02) : 377 - 381
  • [4] Effect of nanoclay on the mechanical and thermal properties of glass fiber-reinforced epoxy composites
    Gurbet Örçen
    Duygu Bayram
    Journal of Materials Science, 2024, 59 : 3467 - 3487
  • [5] Effect of nanoclay on the mechanical and thermal properties of glass fiber-reinforced epoxy composites
    Orcen, Gurbet
    Bayram, Duygu
    JOURNAL OF MATERIALS SCIENCE, 2024, 59 (08) : 3467 - 3487
  • [6] High Performance Composites Based on Highly Filled Glass Fiber-Reinforced Polybenzoxazine for Post Application
    Mora, Phattarin
    Nunwong, Chananya
    Sriromreun, Parkpoom
    Kaewsriprom, Preecha
    Srisorrachatr, Ukrit
    Rimdusit, Sarawut
    Jubsilp, Chanchira
    POLYMERS, 2022, 14 (20)
  • [7] Mechanical properties of woven glass fiber-reinforced polymer composites
    Gao, Guangfa
    Li, Yongchi
    EMERGING MATERIALS RESEARCH, 2016, 5 (02) : 201 - 208
  • [8] Mechanical Properties of Long Glass Fiber-Reinforced Polyolefin Composites
    Tan, Hong-Sheng
    Yu, Yuan-Zhang
    Li, Li-Ping
    Liu, Xue-Jing
    Tan, Zhe-Xing
    Gong, Yan-Yan
    Li, Ai-Xiang
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2015, 54 (13) : 1343 - 1348
  • [9] Mechanical and thermal properties of graphite fiber-reinforced phthalonitrile composites
    Dominguez, DD
    Jones, HN
    Keller, TM
    ADVANCING AFFORDABLE MATERIALS TECHNOLOGY, 2001, 33 : 663 - 674
  • [10] Thermal and Mechanical Properties of Short Fiber-Reinforced Epoxy Composites
    Huang, Guang Chun
    Lee, Chung Hee
    Lee, Jong Keun
    POLYMER-KOREA, 2009, 33 (06) : 530 - 536