Structural and magnetic properties of α-Fe2O3 with lithium ferrite prepared using co-precipitation method and annealed at different temperatures

Using Co-precipitation method, an attempt was made to prepare lithium ferrite. However, during the synthesis, formation of an additional alpha-Fe2O3 phase along with Li0.5Fe2.5O4 was observed. To reduce the alpha-Fe2O3 phase, samples were annealed at 700 degrees C, 800 degrees C and 900 degrees C temperatures for 2 hours. The investigated samples were then characterized using X-Ray diffraction for phase formation and Rietveld analysis was carried out to determine the different structural parameters such as phase percentage, lattice parameter and cell volume. The Chi square values were observed to be within the limit along with goodness of fit less than 3 for all the samples annealed at different temperatures. Surface morphology was carried out using scanning electron microscope and the average grain size was found to be 1.43 mu m for the sample annealed at 900 degrees C. Magnetic properties of samples were investigated, and it was observed that all the samples exhibit low values of saturation magnetization along with coercivity. The presence of two phases such as alpha-Fe2O3 phase and lithium ferrite phase dilutes the exchange interaction, tuning the magnetic parameters.