Optimizing the depletion width to enhance the performance of CH 3 NH 3 PbI 3 flexible photodetector based on the piezo-phototronic effect

The research on organic-inorganic hybrid halide perovskites in the field of optoelectronics has greatly advanced the field of photodetection. However, the reported heterojunction structure of perovskite results in complex preparation processes. A simple method was designed to enhance the performance of CH 3 NH 3 PbI 3 flexible photodetector (PD) by optimizing the depletion width based on the piezo-phototronic effect. Under 5 V bias conditions, when the electrode width of PD is 3, 5, and 8 mu m, where the response peaks at 760 nm are 0.06, 0.02, and 0.01 A/W, respectively. This depends on the decrease of electrode width and the increase of depletion width. As the strain increases, the PD response of the interdigital electrode at 3 mu m increases from 0.020 to 0.0482 A/W. When the strain is 0.3, the responsiveness increases by 240 %. As the strain increases, the PD response of the interdigital electrode at 5 mu m increases from 0.010 to 0.0255 A/W and the PD response of the interdigital electrode at 8 mu m increases from 0.006 to 0.0137 A/W. Therefore, devices with a wide depletion width have significant performance advantages. This work improves the responsivity of perovskite flexible PD based on the piezo-phototronic effect by optimizing the depletion width, providing a simple and effective method for manufacturing perovskite thin film devices on high-performance flexible substrates.