Comprehensive recycling of slag from the smelting of spent automotive catalysts

Spent automotive catalyst is a valuable source of platinum group metals (PGMs), making them crucial secondary resources. Currently, the main process for recovering PGMs from these catalysts is metal capture method. The smelting process would produce a significant amount of residual slags containing various components like SiO2, Al2O3, CaO, Fe2O3, Na2O, as well as high levels of heavy metals including Cr, Pb, and Ni. These slags are considered either solid waste or hazardous waste and usually disposed of in landfills, which can have detrimental effects on the environment. Furthermore, the smelting slags also contain approximately 2-5 % rare earth elements and trace amounts of precious metal elements. In this study, vacuum carbothermal reduction is employed to pretreat the smelting slags. This method not only successfully removes the heavy metal element lead, but also efficiently achieves the recovery of rare earths, and the enrichment of platinum group metals by mineral phase transformation of cerium-zirconium solid solution and in-situ iron capture. The lead removal rate exceeded 99 %, and the grade of precious metals in the enrichment process was approximately 12 times higher than the original material, with a recovery rate more than 90 %. The leaching rate of rare earths also increased from less than 50 % to more than 95 % after vacuum carbothermal reduction. The effect of vacuum carbothermal reduction pretreatment on the smelting slag phase was systematically studied, and the mechanism behind the increasing rare earth leaching rate due to this pretreatment was further analyzed.