Simulation Analysis and Verification on Three-Dimensional Temperature Field of Strain Clamps for Overhead Lines

被引：0
|
作者：
Dong X. [1 ]
Qu F. [1 ]
Li Y. [1 ]
Wang Y. [2 ]
机构：
[1] Transmission Management Department of Guangzhou Power Supply Bureau, Guangzhou
[2] School of Electric Power Engineering, South China University of Technology, Guangzhou
来源：
Xinan Jiaotong Daxue Xuebao/Journal of Southwest Jiaotong University | 2019年 / 54卷 / 05期
关键词：
Contact resistance; Electromagnetic-thermal coupling analysis; Finite element simulation; Overhead line; Strain clamp; Temperature distribution;
D O I：
10.3969/j.issn.0258-2724.20180610
中图分类号：
学科分类号：
摘要：
In order to study the temperature distribution of the strain clamps of overhead lines under different conditions, the finite element model based on the simplified structure of the strain clamp was build, and under the conditions of 600 A power frequency alternating current and different contact resistance ratios, the electromagnetic-thermal coupling finite element simulation analysis of the strain clamp was carried out, and the three-dimensional temperature field distribution of the strain clamp was finally obtained. The simulation results show that under normal conditions, the temperature of the conductive plate of the strain clamp is the lowest. When the contact resistance at different parts of the clamp increases, the increase of contact resistance at the conductive plate has the greatest effect on the overall temperature rise of the clamp, whereas the increase of the contact resistance at the crimp connection of the clamp body has the least effect. Meanwhile the temperature of the clamp will also limit the current carrying capacity of overhead lines. Finally the accuracy of the simulation was verified through the clamp resistance test and temperature rise test, and the error is about 2.3%. © 2019, Editorial Department of Journal of Southwest Jiaotong University. All right reserved.
引用
收藏
页码：997 / 1004
页数：7
相关论文
共 13 条
  • [1] Wang Z., Analysis on breakage causes of steel-cored aluminum strands in strained tube, Electric Power Construction, 26, 4, pp. 35-38, (2005)
  • [2] Du Y., Jing X., Bao J., Et al., Study on overheat of 500 kV transmission line conductive plate, Sichuan Electric Power Technology, 38, 1, pp. 19-21, (2015)
  • [3] Guo X., Li Y., Zhao Y., The analysis and process about high temperature of elementary streams, Electrical Technology, 8, pp. 136-139, (2010)
  • [4] Liu Y., Liu G., Wang Z., Et al., Experimental analysis on crimping resistance of connecting pipe of cable intermediate joint, Guangdong Electric Power, 29, 5, pp. 108-112, (2016)
  • [5] Cui M., Jia C., Wang S., Et al., Thermal image characteristic based on poor contact between conductor and clap, Jilin Electric Power, 41, 6, pp. 36-38, (2013)
  • [6] Wang P., Liu G., Ma H., Liu, Et al., Investigation of the ampacity of a prefabricated straight-through joint of high voltage cable, Energies, 10, pp. 2050-2058, (2017)
  • [7] Liu G., Guo D., Wang P., Et al., Calculation of equivalent resistance for ground wires twined with armor rods in contact terminals, Energies, 11, 4, pp. 737-741, (2018)
  • [8] Zeng R., Zhou P., Wang S., Et al., Modeling of contact resistance in ground system and analysis on its influencing factors, High Voltage Engineering, 36, 10, pp. 2393-2397, (2010)
  • [9] Dhotre M.T., Korbel J., Ye X., Et al., CFD simulation of temperature rise in high-voltage circuit breakers, IEEE Trans. Power Deliv, 32, pp. 2530-2536, (2017)
  • [10] Cai X., Analysis on 500 kV compact transmissionLine strain clamps fracturing accident, North China Electric Power, 3, pp. 36-38, (2003)
12