Integrating hydrogen liquefaction with steam methane reforming and CO2 liquefaction processes using techno-economic perspectives

被引:0
|
作者
Lee, Dongjun [1 ]
Quarme Gbadago, Dela [2 ]
Jo, Youngtak [2 ]
Hwang, Gyuyoung [2 ]
Jo, Yeonpyeong [1 ]
Smith, Robin [3 ]
Hwang, Sungwon [1 ,2 ]
机构
[1] Department of Chemistry and Chemical Engineering, Education and Research Center for Smart Energy and Materials, Inha University, Korea, Republic of
[2] Department of Smart Digital Engineering, Inha University, Korea, Republic of
[3] Centre for Process Integration, School of Chemical Engineering and Analytical Science, The University of Manchester, Sackville Street, Manchester,M13 9PL, United Kingdom
基金
新加坡国家研究基金会;
关键词
Sensitivity analysis - Economic analysis - Carbon - Methane - Multiobjective optimization - Specific heat - Phase interfaces - Refrigerants - Steam reforming - Cost benefit analysis - Genetic algorithms - Energy utilization - Liquefied gases;
D O I
暂无
中图分类号
学科分类号
摘要
The increasing demand for liquid hydrogen as an environmentally friendly energy source necessitates developing an effective hydrogen liquefaction process. In this study, hydrogen production (steam methane reforming), hydrogen liquefaction, and CO2 liquefaction processes were successfully integrated by conducting several parametric studies involving three small-scale models and six scaled-up models. The enhanced liquefaction process included a modified Claude cycle that reduced the specific energy consumption to 6.15 kWh/kgLH2, 47% lower than that of a reference process. Three different refrigerants (nitrogen, liquified natural gas, and hydrogen) were utilized in the integrated process, and an interactive genetic algorithm-based multi-objective optimization model was developed using the MATLAB–Aspen HYSYS interface to minimize the energy consumption and CO2 generation. In addition, a hybrid non-isothermal ortho–para hydrogen cooling heat exchanger was designed by performing an H2 specific heat correction to enhance the robustness of the developed model. Techno-economic analysis of the designed process indicated that the integrated system considerably improved the main economic indicators (Levelized cost of hydrogen) and environmental friendliness of the hydrogen production process by approximately 51% and 95%, respectively. Moreover, CO2 liquefaction was performed most efficiently at a pressure of 120 bar with a reduced overall process cost. In addition, the LOCH (Levelized cost of hydrogen) of all the design integrated processes is less than $3/kg in market accessibility compared to the reference process. The sensitivity analysis results conducted by varying the costs of refrigerants, power (electricity), the selling price of liquid hydrogen, and carbon price revealed that the proposed integrated process had a higher application potential than other commonly used processes. In particular, under conditions of 45 tonne/day or more of carbon prices, the integrated process is environmentally and economically advantageous over the CO2 emission process with a reduced PBP of at least 10%. © 2021 Elsevier Ltd
引用
收藏
相关论文
共 50 条
  • [1] Integrating hydrogen liquefaction with steam methane reforming and CO2 liquefaction processes using techno-economic perspectives
    Lee, Dongjun
    Gbadago, Dela Quarme
    Jo, Youngtak
    Hwang, Gyuyoung
    Jo, Yeonpyeong
    Smith, Robin
    Hwang, Sungwon
    ENERGY CONVERSION AND MANAGEMENT, 2021, 245
  • [2] Techno-economic assessment of CO2 liquefaction for ship transportation
    Zahid, Umer
    An, Jinjoo
    Lee, Ung
    Choi, Seung Phill
    Han, Chonghun
    GREENHOUSE GASES-SCIENCE AND TECHNOLOGY, 2014, 4 (06): : 734 - 749
  • [3] Techno-economic analysis of integrating the methane oxidative coupling and methane reforming processes
    Godini, Hamid Reza
    Xiao, Shengnan
    Jaso, Stanislav
    Stuenkel, Steffen
    Salerno, Daniel
    Nghiem Xuan Son
    Song, Shankui
    Wozny, Guenter
    FUEL PROCESSING TECHNOLOGY, 2013, 106 : 684 - 694
  • [4] Techno-economic assessment of CO2 capture at steam methane reforming facilities using commercially available technology
    Meerman, J. C.
    Hamborg, E. S.
    van Keulen, T.
    Ramirez, A.
    Turkenburg, W. C.
    Faaij, A. P. C.
    INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL, 2012, 9 : 160 - 171
  • [5] Techno-economic analyses of CO2 liquefaction: Impact of product pressure and impurities
    Deng, Han
    Roussanaly, Simon
    Skaugen, Geir
    INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2019, 103 : 301 - 315
  • [6] Techno-economic comparisons of CO2 compression and liquefaction processes with distillation columns for high purity and recovery
    Jung, Pyeong-Gon
    Kim, Semie
    Lim, Young-Il
    Kim, Hyojoon
    Moon, Hung-Man
    International Journal of Greenhouse Gas Control, 2024, 134
  • [7] Techno-economic comparisons of CO2 compression and liquefaction processes with distillation columns for high purity and recovery
    Jung, Pyeong-Gon
    Kim, Semie
    Lim, Young-Il
    Kim, Hyojoon
    Moon, Hung-Man
    INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL, 2024, 134
  • [8] Exergetic and Economic Evaluation of CO2 Liquefaction Processes
    Chen, Feng
    Morosuk, Tatiana
    ENERGIES, 2021, 14 (21)
  • [9] Scenario-Based Techno-Economic Analysis of Steam Methane Reforming Process for Hydrogen Production
    Lee, Shinje
    Kim, Hyun Seung
    Park, Junhyung
    Kang, Boo Min
    Cho, Churl-Hee
    Lim, Hankwon
    Won, Wangyun
    APPLIED SCIENCES-BASEL, 2021, 11 (13):
  • [10] Techno-economic performance of a hybrid membrane - liquefaction process for post-combustion CO2 capture
    Anantharaman, Rahul
    Berstad, David
    Roussanaly, Simon
    INTERNATIONAL CONFERENCE ON APPLIED ENERGY, ICAE2014, 2014, 61 : 1244 - 1247